t Cancel pause of the Bluetooth device. The sound skips during audio streaming. • Reduce the distance between the unit and the Bluetooth device. • If the Bluetooth device is stored in a case which interrupts the signal, remove the case while using the device. • Several Bluetooth devices or other devices which emit radio waves are used nearby. t Turn off the other devices. t Increase the distance from the other devices. • The playback sound stops momentarily when this unit is connecting to a cell

каждого диска/формата показаны ниже. Параметры повтора и порядок Параметры произвольного переключения каждого диска/формата воспроизведения и порядок переключения показаны ниже. каждого диска/формата показаны ниже. Доступные значения “ВЫКЛ”: возврат в обычный режим воспроизведения. “Раздел”: повтор текущего раздела. “Название”: повтор текущей главы. *1 “ВЫКЛ”: возврат в обычный режим воспроизведения. “Дорожка”: повтор текущей дорожки. “ВЫКЛ”: возврат в обычный режим воспроизведения. “Дорожка”:

• Meiden Sie Aufstellorte mit den folgenden Bedingungen: —Extreme Temperaturen —Staub- oder Schmutzbelastung —Extreme Luftfeuchtigkeit —Vibrationsbelastung —Direkte Sonneneinstrahlung • Seien Sie vorsichtig, wenn Sie den Lautsprecher auf einen besonders behandelten Fu.boden (gewachst, geolt, poliert usw.) stellen, da es zu Flecken oder Verfarbungen kommen kann. Reinigung Reinigen Sie die Lautsprechergehause mit einem weichen Tuch, das leicht mit einer milden Reinigungslosung oder wasser angefeuc

. If no car circuits are rated high enough, connect the unit directly to the battery. Parts list . The numbers in the list correspond to those in the instructions. . The bracket . is attached to the unit before shipping. Before mounting the unit, use the release keys . to remove the bracket . from the unit. For details, see “Removing the bracket (.)” on the reverse side of the sheet. . Keep the release keys . for future use as they are also necessary if you remove the unit from your car. . The s

Note Some cellular phones require permission to access their phonebook data during handsfree connection to this unit. Obtain permission via the cellular phone. Tip With Bluetooth signal on: when the ignition is switched to on, this unit reconnects automatically to the last- connected cellular phone. But automatic connection also depends on the cellular phone’s specification. If this unit does not reconnect automatically, connect manually. Connecting an audio device 1 Make sure the Bluetooth sign

Installing “Media Go” to your computer Software (“Media Go”) is required to enable the SensMe™ function on this unit. 1 Download “Media Go” software from the support site on the back cover. 2 Follow the on-screen instructions to complete the installation. Transferring tracks to the USB device using “Media Go” To enable the SensMe™ function on this unit, tracks need to be analyzed and transferred to the registered USB device using “Media Go.” 1 Connect the registered USB device to your computer.

are bent inwards 3.5 mm (5/32 in). If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. Connection example Notes (.-A) . Be sure to connect the ground (earth) lead before connecting the amplifier. . The alarm will only sound if the built-in amplifier is used. Note (.-B) You cannot use multiple auxiliary devices simultaneously, even if they are connected to different terminals. Connection diagram . To AMP REMOTE IN of an optional power amplifie

Be sure to install this unit in the dashboard of the car for safety. For installation and connections, refer to the supplied “Installation/Connections” guide. • This manual contains instructions for XAV64BT and XAV-63. • XAV-64BT is the model representatively used for illustration purposes. • Bluetooth functions and descriptions apply only to XAV-64BT. Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer se

*4 RCA pin cord (not supplied) *5 For details on connecting to the parking brake switch cord, see “Connecting the parking brake lead (.)” on the reverse side. *6 not supplied *7 The sound is output from this terminal only when ZONE x ZONE is activated. This terminal outputs a fixed level regardless of the volume control of the unit. *8 A separate adaptor may be required. *9 USB connection cable RC-202IPV (not supplied). To connect an iPod via RC-202IPV, make sure to connect the video output plug

The Bluetooth setting menu appears. 2 Touch the desired item in the list and configure the setting. The items in the Bluetooth setting menu are as follows: “Bluetooth Connection”* Activates the Bluetooth signal: “ON,” “OFF.” Touch “Pairing >” to enter the Paring mode. “Bluetooth Initialize”* Initializes all Bluetooth-related settings. Touch “Initialize” to confirm. “Bluetooth Initialize” deletes all Bluetoothrelated settings such as phonebook data, call history, preset dial, history of connected