Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
are bent inwards 3.5 mm (5/32 in). If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. Connection example Notes (.-A) . Be sure to connect the ground (earth) lead before connecting the amplifier. . The alarm will only sound if the built-in amplifier is used. Note (.-B) You cannot use multiple auxiliary devices simultaneously, even if they are connected to different terminals. Connection diagram . To AMP REMOTE IN of an optional power amplifier This connection is only for amplifiers. Connecting any other system may damage the unit. . To the parking brake switch cord . To an auxiliary device such as a portable media player, game console, etc. (not supplied) Tip You can use an RCA pin cord (not supplied) to connect auxiliary devices. . To the +12 V power terminal of the car’s rear lamp lead (only when connecting the rear view camera) Warning If you have a power antenna (aerial) without a relay box, connecting this unit with the supplied power supply connection cable . may damage the antenna (aerial). Notes on the control and power supply leads . The power antenna (aerial) control lead (blue) supplies +12 V DC when you turn on the tuner, or when you activate the AF (Alternative Frequency) or TA (Traffic Announcement) function. . If your car has a built-in FM/MW/LW antenna (aerial) in the rear/side glass, connect the power antenna (aerial) control lead (blue) or the accessory power supply lead (red) to the power terminal of the antenna (aerial) booster. For details, consult your car dealer. . A power antenna (aerial) without a relay box cannot be used with this unit. Memory hold connection When the yellow power supply lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off. Notes on speaker connection . Before connecting the speakers, turn the unit off. . Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid damage. . Do not connect the speaker terminals to the car chassis, or connect the terminals of the right speakers with those of the left speakers. . Do not connect the ground (earth) lead of this unit to the negative (–) terminal of a speaker. . Do not attempt to connect the speakers in parallel. . Connect only passive speakers. Connecting active speakers (with built-in amplifiers) to the speaker terminals may damage the unit. . To avoid a malfunction, do not use the built-in speaker leads installed in your car if they feature a common negative (–) lead for the right and left speakers. . Do not connect the unit’s speaker leads to each other. Notes on connection . If “Output connection failure.” appears in the display, make sure the speaker and amplifier are connected correctly. . To use the monitor for the rear seats, connect the parking brake switch cord to the ground (earth). FRONT AUDIO OUT SUB OUT REAR OUT Z.Z L / R REAR AUDIO OUT AUX IN ( VIDEO ) AUX AUDIO IN CAMERA * not supplied Video camera* A B 4-422-719-31(1) Installation/Connections AV Center XAV-701BT Equipment used in illustrations (not supplied) Subwoofer Smartphone . b c Front speaker iPod Rear speaker Rear view camera Power amplifier Monitor a . . . . 2 . . . . . 8 . . . 2 . 2 *1 For details on installing the microphone, see “Installing the microphone (.)” on the reverse side. *2 If your car antenna (aerial) is an ISO (International Organization for Standardization) type, use the supplied adaptor . to connect it. First connect the car antenna (aerial) to the supplied adaptor, then connect the adaptor . to the antenna (aerial) jack of the unit. *3 Whether in use or not, route the microphone input cord such that it does not interfere with driving. Secure the cord with a clamp, etc., if it is installed around your feet. *4 RCA pin cord (not supplied) *5 For details on connecting to the parking brake switch cord, see “Connecting the parking brake lead (.)” on the reverse side. *6 Speaker impedance: 4 – 8 ohms . 4 *7 The sound is output from this terminal only when ZONE x ZONE is activated. This terminal outputs a fixed level regardless of the volume control of the unit. *8 A separate adaptor may be required. *9 Not supplied *10 USB connection cable RC-202IPV (not supplied). To connect an iPod via RC-202IPV, make sure to connect the video output plug to AUX1 IN. Max. supply current: 0.3 A AMP REM Blue/white striped PARKING BRAKE Light green *5 From the car’s power connector For details, see “Power connection diagram” on the reverse side. From the car’s speaker connector *6 Negative polarity positions 2, 4, 6, and 8 have striped leads. 1 Purple + Speaker, rear, right 2 – Speaker, rear, right 3 Gray + Speaker, front, right 4 – Speaker, front, right 5 White + Speaker, front, left 6 – Speaker, front, left 7 Green + Speaker, rear, left 8 – Speaker, rear, left Positions 1, 2, and 3 do not have pins. 4 Yellow Continuous power supply 5 Blue Power antenna (aerial) control 6 Orange/white Switched illu...