|
Anleitung Zusammenfassung
¦ The door WILL NOT CLOSE unless the Protector System® is connected and properly aligned. ¦ Periodic checks of the opener are required to ensure safe operation. ¦ The model number label is located on the front panel of your opener. TABLE OF CONTENTS Introduction 2-7 Safety symbol and signal word review........................2 Preparing your garage door ........................................3 Tools needed...............................................................3 Planning ..................................................................4-5 Carton inventory..........................................................6 Hardware inventory .....................................................7 Assembly 8-11 Fasten the rail to the motor unit..............................8, 9 Install the chain and the sprocket cover .....................8 Install the chain spreader and the chain ...................10 Tighten the chain .......................................................11 Installation 11-27 Installation safety instructions....................................11 Determine the header bracket location................12-13 Install the header bracket..........................................14 Attach the rail to the header bracket.........................15 Position the opener ...................................................16 Hang the opener .......................................................17 Install the door control...............................................18 Install the light and lens ............................................19 Attach the emergency release rope and handle .......19 Electrical requirements..............................................20 Install the Protector System®................................21-23 Fasten the door bracket.......................................24-25 Connect the door arm to the trolley .....................26-27 INTRODUCTION Safety Symbol and Signal Word Review Adjustment 28-30 Adjust the travel limits ...............................................28 Adjust the force .........................................................29 Test the safety reversal system.................................30 Test the Protector System®........................................30 Operation 31-34 Operation safety instructions.....................................31 Using your garage door opener ................................31 Using the wall-mounted door control ........................32 To open the door manually........................................32 Care of your garage door opener..............................33 Having a problem? ....................................................34 Programming 35-36 To add or reprogram a hand-held remote control .....35 To erase all codes .....................................................35 3-Button remotes.......................................................35 To add, reprogram or change a Keyless Entry PIN ..................................................36 Repair Parts 37-38 Rail assembly parts...................................................37 Installation parts ........................................................37 Motor unit assembly parts.........................................38 Accessories 39 Repair Parts and Service 40 Warranty 40 This garage door opener has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in strict accordance with the instructions and warnings contained in this manual. WARNING Mechanical WARNING Electrical CAUTION When you see these Safety Symbols and Signal Words on the following pages, they will alert you to the possibility of serious injury or death if you do not comply with the warnings that accompany them. The hazard may come from something mechanical or from electric shock. Read the warnings carefully. When you see this Signal Word on the following pages, it will alert you to the possibility of damage to your garage door and/or the garage door opener if you do not comply with the cautionary statements that accompany it. Read them carefully. 2 Preparing your garage door Before you begin: • Disable locks. • Remove any ropes connected to garage door. • Complete the following test to make sure your garage door is balanced and is not sticking or binding: 1. Lift the door about halfway as shown. Release the door. If balanced, it should stay in place, supported entirely by its springs. 2. Raise and lower the door to see if there is any binding or sticking. If your door binds, sticks, or is out of balance, call a trained door systems technician. Sectional Door One-Piece Door WARNING To prevent possible SERIOUS INJURY OR DEATH: • ALWAYS call a trained door systems technician if garage door binds, sticks, or is out of balance. An unbalanced garage door may not reverse when required. • NEVER try to loosen, move or adjust garage door, door springs, cables, pulleys, brackets or their hardware, all of which are under EXTREME tension. • Disable ALL ...
Dieses Handbuch ist für folgende Modelle:Safety Gate - 1245R - 1/3HP (1.27 mb)
Safety Gate - 1246R - 1/3HP (1.27 mb)
Safety Gate - 1255R - 1/2HP (1.27 mb)
Safety Gate - 1256R - 1/2HP (1.27 mb)