LOC ON appears on the display and only local stations are available. When you turn it off both distance and local stations can be received. Note: The function is invalid in AM tuning. Selecting the Stored Station During radio mode, press ^/^ buttons on the RC or on the front panel to select the stored station upward/downward. MO/ST Selector During radio mode, you can press ST/AUDIO button on the remote control to select mono mode or stereo mode. Stereo reception is on when ST ON appears. It

Press the button again to return to normal playback. System switch During playback, press repeatedly P/N button on the RC to set the TV system to PAL or NTSC or AUTO. 25 Slow playback Press repeatedly SLOW button on the RC for slow forward or backward playback in the following order: For DVD: 1/2 forward => 1/4 forward => 1/8 forward => 1/2 backward => 1/4 backward => 1/8 backward => Normal. For VCD: 1/2 forward => 1/4 forward => 1/8 forward => Normal. Picture zooming Press ZOOM button

If RDS service is not available in your area, turn off the AF mode. 19 TA (Traffic alarm) function Briefly press TA/LOUD button to activate the traffic alarm function. When AF is on, the TA displays on TFT, or else, if there is no TP information, the mode will search TP station automatically. The TA is green when it is played by a station, if not, it is yellow. When TA is playing, the volume will be adjusted to a TA level automatically. When other modes are activated (such as DVD, AUX), if a

To stop preset scan, press this button again. Auto memory store function Press and hold for 2 seconds AMS button to enter auto store mode. The radio will automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press AMS button. Mono/Stereo selection Press the AF/ST button to select the channel mode: MONO or STEREO. When Stereo reception is activated, "ST ON" appears on the display. 14 Local mode Press LOC/RDM button on the R

Wire should be high power level and the unit cannot play video disc. 6 Panel controls Front panel 1. MENU button 2. BAND button 3. SOURCE button 4. Cursor button 5. Microphone 6. MUTE button 7. USB slot 8. APS/PLAY/PAUSE button 9. CLK/STOP button 10. ST/RPT button 11. LCD display 12. VOL/ENTER knob 13. OPEN button 7 Inner panel The front panel of this unit can be detached to show the inner panel with disk slot. Press EJECT button to open the inner panel. To unload the disk pre

For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents...............................................................................................2 Important safeguards.........................................................................................3 Accessories.................................................................

You can select: AUTO: the TV system is auto switched according to the disc system. NTSC: this system is used in USA, Taiwan, Japan etc. PAL: this system is used in China, Europe, Hong Kong etc. • TV type 4:3 PS: When the unit connects to the normal TV set, the wide-screen image shows on the full screen, but some part is cut off. 4:3 LB: When the unit connects to the normal TV set, the wide-screen image shows and black bars appear on the top and bottom of screen. 16:9: Use this item when t

Wire should be high power level and the unit cannot play video disc. 6 Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit. 3. Cut the connector, connect the colored leads of the power cord to the car battery as shown in the color code table below for speak

For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image. Title The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record several films on one disc. For example, if a disc contains three films, they may be divided into Title 1, Title 2 and Title 3. You can easy use the functions of looking-for. Chapter A ti

Press again to turn the power off. MENU-VOL knob/SEL button Rotate VOLUME knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level. Briefly press it (the SEL button) to set the volume characteristics. Press and hold it to show the system menu, rotate it to set the item. AMS button (RPT button) In RADIO mode briefly press it to start preset station scanning. Press and hold it, the automatic stations searching and saving will start. Firstly press it, the