Stimmen - 7, Durchschnittliche Bewertung: 3.9
(
)
)
|
Anleitung Zusammenfassung
Wire should be high power level and the unit cannot play video disc. 6 Panel controls Front panel 1. MENU button 2. BAND button 3. SOURCE button 4. Cursor button 5. Microphone 6. MUTE button 7. USB slot 8. APS/PLAY/PAUSE button 9. CLK/STOP button 10. ST/RPT button 11. LCD display 12. VOL/ENTER knob 13. OPEN button 7 Inner panel The front panel of this unit can be detached to show the inner panel with disk slot. Press EJECT button to open the inner panel. To unload the disk press EJECT again To set the unit to the initial settings press RESET button. 14. SD-slot 15. RESET button 16. EJECT button 8 Remote control 1. PWR button 2. SUB-T button 3. DI+/- buttons (OPTION) 4. +/-/PREV/NEXT/SEL buttons 5. CLK button 6. N/P/ANGLE (option) button 7. PLAY/PAUSE button 8. R/L/LANGUAGE button 9. RIGHT/LEFT/UP/DOWN cursor buttons/ENTER button 10. OSD button 11. SETUP button 12. Number buttons 13. AF button (option) 14. TA button (option) 15. PTY button (option) 16. GOTO button 17. TITLE/PBC button 18. STOP button 19. EQ button 20. ST/RPT button 21. APS/PRG button 22. BAND/RDM button 23. MUTE button 24. SOURCE button Loading and replacing the battery Use one lithium battery (CR2025). Insert the battery with + and - poles aligned properly. 9 13 14 15 General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press OPEN button, then press the RESET button with some sharp object to restore the unit to the original factory settings. Power button Press SOURCE button on the front panel or PWR button on the RC to switch the unit on. Press and hold SOURCE button on the front panel or press PWR button on the RC to switch the unit off. Volume control Rotate VOL knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level. Mode selection Press the SOURCE button to select the mode: RADIO => DISC => SD = > USB => BACK VIEW => INPUT => TV. Touch the certain icon or use cursor buttons to select the exact mode needed. Mute function Press the MUTE button to turn off the sound. Press again to resume. Equalizer setting Press EQ button on the RC repeatedly to select EQ mode: NORM => ROCK => POP => CLAS => or enter the EQ mode through the Menu setting (Audio settings), press MENU button on the panel. Clock display Use Menu settings (System Mode) to show the clock indication on the display or enter clock adjustment. With LEFT/RIGHT cursor buttons choose hours/minutes, with UP/DOWN cursor buttons set the right time (or just touch the minute digit or hour digit you need to set). Hi t Rrtcc D*e SO USB •S* PJ Bock v»cw Input 10 Radio operations Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. BAND selection Press BAND button on the panel or on the RC repeatedly to select your desired radio band during RADIO mode: FM1, FM2, FM3, AM1, AM2. Auto/Manual tuning - Press and hold LEFT/RIGHT buttons on the panel or PREV/NEXT buttons on the RC to choose either manual or auto search. - In auto tuning mode: press NEXT/PREV buttons on the RC or LEFT/RIGHT cursor buttons on the panel, the unit will search stations automatically. - In manual tuning mode: press NEXT/PREV buttons on the RC or LEFT/RIGHT cursor buttons on the panel repeatedly to find the needed station. - Use UP/DOWN cursor buttons on the panel to select the station that has already been stored. Auto memory store Select a band. Press APS/PLAY/PAUSE button on the panel or APS button on the RC and hold for 2 seconds to enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto store, press any button except PWR. Preset scan Select a band. Press APS button on the RC or APS/PLAY/PAUSE button on the panel to scan all preset stations in the memories of the current band and stay on each memory stations for about 4 seconds. To stop preset scan, press APS button on the RC or APS/PLAY/PAUSE button on the panel again. Programming tuner stations You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically. To store a station: - Select a band (if needed). - Select a station by LEFT/RIGHT cursor buttons on the unit or PREV/NEXT buttons on the RC. 11 - Hold UP/DOWN cursor buttons to store a station. To recall a station: - Select a band (if needed). - Press UP/DOWN cursor buttons to recall the stored station. Mono/Stereo selection Press the ST/RPT button on the RC to select ST OFF (Mono) or ST ON (Stereo) mode. TA (Traffic Announcement) function - Press the TA button on the RC or on the panel to turn on or turn off the TA function. - When the traffic announcement is found the tuner will switch to this station automatically. AF (Alternative Frequencies) function Press...
Dieses Handbuch ist für folgende Modelle:DVD-Player - Soundmax SM-CMD3010 (1.25 mb)