Login:
Stimmen - 5, Durchschnittliche Bewertung: 4 ( )

Anleitung Sirius Satellite Radio, modell SiriusConnect SNYSC1

Hersteller: Sirius Satellite Radio
Dateigröße: 1.21 mb
Dateiname: SNYSC1_OM.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


The SNYSC1 is compatible with all Sony SAT-Radio-Ready headunits. It can be connected to either the SCC1 SiriusConnect Vehicle Tuner or the SCVDOC1 SiriusConnect Vehicle Dock with a compatible Dock and Play or portable SIRIUS radio attached. Reguires Sony ...and a SiriusConnect tuner (SCC1) or a SAT-Radio-Ready Headunit... vehicle kit (SCVDOC1) and compatible Dock and Play or Portable radio Table of Contents Table of CoNTeNTS 3 CoPYrIghTS & TrademarkS 4 WarNINg aNd SafeTY INformaTIoN 5 FCC Information ............................ 5 Canadian Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety Precautions............................ 6 PaCkage CoNTeNTS 7 ComPaTIbIlITY 9 CoNNeCTorS 10 INSTallaTIoN 12 Mounting the SNYSC1 Interface . . . . . . . . . . . . . . . . . . . . . .12 Wiring the SNYSC1 Interface. . . . . . . . . . . . . . . . . . . . . . .15 oPeraTIoN 20 SPeCIfICaTIoNS 21 [ Table of Contents ] Copyrights & Trademarks © 2007 Sirius Satellite Radio Inc. All Rights Reserved. ® “SIRIUS”, the SIRIUS dog logo, channel names and logos are trademarks of Sirius Satellite Radio Inc. “Sony” is a registered trademark of Sony Electronics Inc. “iPod” is a registered trademark of Apple Inc. All Rights Reserved. ™ “SiriusConnect”, is a trademark of Sirius Satellite Radio Inc. UniLink is a trademark of Sony Electronics Inc. Hardware, subscription, and activation fee required. For full Terms & Conditions, visit Prices and programming are subject to change. Not available in HI and AK. Equipment and subscription sold separately. Installation required with some equipment. [ Copyrights & Trademarks ] Warning and Safety Information FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and the receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. WarNINg Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. [ Warning and Safety Information ] Canadian Compliance This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Safety Precautions Be sure to observe the following warnings. Failure to follow these safety instructions and warnings may result in a serious accident and/or personal injury. • Install the cables and wiring so that it is not crimped or pinched by screws or sharp metal edges. Route the cables away from moving parts or sharp pointed edges. This will prevent crimping and damage to the wiring. If the wiring must pass through a metal hole, be sure to use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole. • Do not open, disassemble or alter the unit in any way. Doing so may result in fire, electric shock or product damage. • Do not insert any objects into the unit. Doing so may result in fire, electric shock or product damage. • Do not install the unit to high levels of humidity, moisture or dust. Doing so can result in electric shock or product failure. [ Warning and Safety Information ] [ Package Contents ] Package Contents The following items are included with your purchase of the SNYSC1. Unpack the materials carefully and make sure that everything shown is present. If anything is missing or damaged, or if the device fails to operate properly, notify your dealer immediately. It is recommended that you retain the original carton and packing materials in case you need to ship your kit in the future. SNYSC1 SiriusConnect Interface Adapter Power Harness [ Package Contents ] UniLink™ Data Cable Audio Cable Mounting screws (x4) Compatibility The SNYSC1 SiriusConnect Interface is compatible with all Sony SAT-Radio-Ready ...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien