Stimmen - 5, Durchschnittliche Bewertung: 4.6
(
)
)
|
Anleitung Zusammenfassung
(After three seconds, the dial function reverts to volume control.) Changing the operative direction The operative direction of controls is factory- set as shown below. To increase Attenuating the sound Press (att) on the rotary commander. "ATT-ON" flashes momentarily. To restore the previous volume level, press (ATT) again. To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Press (sound) for two seconds while pushing the VOL control. Tip You can also change the operative direction of these controls with the unit (see "Changing the sound and display settings" on page 19). 18 Changing the sound and display settings The following items can be set: • CLOCK (page 7). • CT (Clock Time) (page 16). • BEEP - to turn the beep sound on or off. • RM (Rotary Commander) - to change the operative direction of the rotary commander. — Select "NORM" to use the rotary commander as the factory-set position. — Select "REV" when you mount the rotary commander on the right side of the steering column. • M.DSPL (Motion Display) - to turn the motion display on or off. • A.SCRL (Auto Scroll)* (page 20) (XR-C33R only) . 1 Press (shift). 2 Press (2) (SET UP) repeatedly until the desired item appears. Each time you press (2) (SET UP), the item changes as follows: CLOCK n CT n BEEP n RM n M.DSPL n A.SCRL* * When no CD or MD is playing, this item will not appear. 3 Press (4) (n) to select the desired setting (Example: ON or OFF). Boosting the bass sound — D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS control. Adjusting the bass curve Turn the D-BASS control to adjust the bass level (1, 2, or 3). "D-BASS" appears in the display. To cancel, turn the control to OFF. Note If the bass sound becomes distorted, adjust the D-BASS control or volume. 4 Press (shift). After the mode setting is complete, the display returns to normal playback mode. Note If the "SFT" indication appears, press (shift) to complete the mode setting. 19 With Optional Equipment CD/MD Unit (XR-C33R only) This unit can control a maximum of ten external CD/MD units in this configuration: CD unit - maximum of five MD unit - maximum of five Any combination up to ten will work. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. Playing a CD or MD 1 Press (source) repeatedly to select CD or MD. 2 Press (mode) until the desired unit appears. CD/MD playback starts. When a CD/MD unit is connected, all the tracks play from the beginning. Changing the display item Each time you press (dspl) during CD, CD TEXT, or MD playback, the item changes as follows: *1 If you have not labelled the disc or if there is no disc name prerecorded on the MD, "NO NAME" appears in the display. *2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name.) *3 If the track name of a CD TEXT disc or MD is not prerecorded, "NO NAME" appears in the display. *4 While the AF/TA function is activated. After you select the desired item, the display wiH automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. (See "Changing the sound and display settings" on page 19). Automatically scrolling a disc name — Auto Scroll If the disc name, artist name, or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows: • The disc name appears when the disc has changed (if the disc name is selected). • The track name appears when the track has changed (if the track name is selected). If you press (dspl) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off. 1 During playback, press (shift). 2 Press (2) (SET UP) repeatedly until “A.SCRL" appears. 3 Press (4) (n) to select “A.SCRL-ON." 4 Press (shift). To cancel Auto Scroll, select "A.SCRL-OFF" in step 3 above. Note For some discs with very many characters, the following cases may happen: —Some of the characters are not displayed —Auto Scroll does not work. Tip To manually scroll the long name of an MD or CD TEXT disc after activating the Auto Scroll function, press (shift), then (1) (n) (manual scroll). 20 Locating a specific track — Automatic Music Sensor (AMS) During playback, push the SEEK/AMS control up or down and release for each track y...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - XR-C33R (1.36 mb)