Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Sony Dateigröße: 2.38 mb Dateiname: Unterrichtssprache:

These settings function regardless of the current FM programme/source, CD/MD; the unit switches back to the original source when the bulletin is over. Press (TA) repeatedly until “TA-ON” appears. The unit starts searching for traffic information stations. “TP” indicates reception of such stations, and “TA” flashes during an actual traffic announcement. The unit will continue searching for stations available with TP if “NO TP” is indicated. To cancel all traffic announcements, select “TA-OFF.” To Press Cancel current (TA) announcement Tip You can also cancel the current announcement by pressing ( source) or (mode). Presetting the volume of traffic announcements You can preset the volume level of the traffic announcements so you won’t miss hearing them. 1 Turn the volume control dial to adjust the desired volume level. 2 Press (TA) for 2 seconds. “TA” appears and the setting is stored. Receiving emergency announcements If either AF or TA is on, the unit will switch to emergency announcements, if one comes in while listening to an FM station or CD/MD. 17 Presetting RDS stations with Tuning in stations by AF and TA setting programme type When you preset RDS stations, the unit stores each station’s AF/TA setting (on/off) as well as its frequency. You can select a different setting (for AF, TA, or both) for individual preset stations, or the same setting for all preset stations. If you preset stations with “AF-ON” the unit automatically stores stations with the strongest radio signal. Presetting the same setting for all preset stations Select an FM band (page 14). Press (af) and/or (TA) to select “AF-ON” and/or “TA-ON.” Note that selecting “AF-OFF” or “TA-OFF” stores not only RDS stations, but also non-RDS stations. Press (menu), then press either side of (disc/preset) repeatedly until “BTM” appears. Press (enter) until “BTM” flashes. Presetting different settings for each preset station 1 Select an FM band, and tune in the desired station (page 15). 2 Press (af) and/or (TA) to select “AF-ON” and/or “TA-ON.” 3 Press the desired number button (CD to (6)) until “MEM” appears. Repeat from step 1 to preset other stations. — PTY You can tune in a station by selecting the type of programme you would like to listen to. Programme types Display News NEWS Current Affairs AFFAIRS Information INFO Sports SPORT Education EDUCATE Drama DRAMA Culture CULTURE Science SCIENCE Varied VARIED Popular Music POP M Rock Music ROCK M Easy Listening EASY M Light Classical LIGHT M Classical CLASSICS Other Music Type OTHER M Weather WEATHER Finance FINANCE Children’s Programmes CHILDREN Social Affairs SOCIAL A Religion RELIGION Phone In PHONE IN Travel TRAVEL Leisure LEISURE Jazz Music JAZZ Country Music COUNTRY National Music NATION M Oldies Music OLDIES Folk Music FOLK M Documentary DOCUMENT Note You cannot use this function in some countries where no PTY (Programme Type selection) data is available. 18 1 Press (DISPLAY/PTY) during FM reception until “PTY” appears. ji TMCn _imru The current programme type name appears if the station is transmitting the PTY data. “........” appears if the received station is not an RDS station, or if the RDS data is not received. 2 Press (disc/preset) repeatedly until the desired programme type appears. The programme types appear in the order shown in the table. “........” appears if the programme type is not specified in the RDS data. 3 Press (ENTER). The unit starts searching for a station broadcasting the selected programme type. Setting the clock automatically — CT The CT (Clock Time) data from the RDS transmission sets the clock automatically. 1 During radio reception, press (menu), then press either side of (disc/ preset) repeatedly until “CT-OFF” appears. 2 Press the (+) side of (seek) repeatedly until “CT-ON” appears. The clock is set. 3 Press (enter) to return to the normal display. To cancel the CT function, select “CT-OFF” in step 2. Notes • The CT function may not work even though an RDS station is being received. • There might be a difference between the time set by the CT function and the actual time. 19 *1 Only if the corresponding optional equipment is _ connected. Other Functions *2 If your car has no ACC (accessory) position on the ignition key switch, be sure to press (off) for 2 seconds to turn off the clock indication after turning You can also control the unit (and optional CD/ off the ignition. MD units) with a rotary commander (optional). By rotating the control Using the rotary commander First, attach the appropriate label depending on how you want to mount the rotary commander. The rotary commander works by pressing buttons and/or rotating controls. Rotate and release to: - Skip tracks. - Tune in stations automatically. Rotate, hold, and release to: - Fast-forward/reverse a track. - find a station manually. By pressing buttons By pushing in and rotating the control to adjust the vo...

Herunterladen

Geben Sie zwei Ziffern: