|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1 Display the initial setting menu. Refer to Adjusting initial settings on the previous page. 2 Use MULTI-CONTROL to select Off clock in the initial setting menu. 3 Press MULTI-CONTROL to turn the off clock display on. # To turn the off clock display off, press MULTI-CONTROL again. Setting the FM tuning step Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on. 1 Display the initial setting menu. Refer to Adjusting initial settings on the previous page. 2 Use MULTI-CONTROL to select FM step in the initial setting menu. 3 Press MULTI-CONTROL to select the FM tuning step. Pressing MULTI-CONTROL repeatedly will switch the FM tuning step between 50 kHz and 100 kHz. The selected FM tuning step will appear in the display. # The tuning step remains at 50 kHz during manual tuning. Switching Auto PI Seek The unit can automatically search for a different station with the same programming, even during preset recall. 1 Display the initial setting menu. Refer to Adjusting initial settings on the previous page. 2 Use MULTI-CONTROL to select Auto PI in the initial setting menu. 50 En Section Initial Settings 11 3 Press MULTI-CONTROL to turn Auto PI seek on. # To turn Auto PI seek off, press MULTI-CONTROL again. Switching the warning tone If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone sounds. You can turn off the warning tone. 1 Display the initial setting menu. Refer to Adjusting initial settings on page 49. 2 Use MULTI-CONTROL to select Warning tone in the initial setting menu. 3 Press MULTI-CONTROL to turn warning tone on. # To turn warning tone off, press MULTI-CONTROL again. Switching the auxiliary setting Auxiliary devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 55. 1 Display the initial setting menu. Refer to Adjusting initial settings on page 49. 2 Use MULTI-CONTROL to select AUX1/ AUX2. 3 Press MULTI-CONTROL to turn AUX1/ AUX2 on. # To turn AUX off, press MULTI-CONTROL again. List TTS (Text to speech) Playback T TS playback can be performed for an item selected with the cursor in a list. If this is set to on, any item the cursor is on for 2 seconds or longer is read out. ! This function is available for the name in the following lists: — Phone book (phone book) — Missed calls (missed call history) — Dialed calls (dialed call history) — Received calls (received call history) 1 Display the initial setting menu. Refer to Adjusting initial settings on page 49. 2 Use MULTI-CONTROL to select List guidance. 3 Press MULTI-CONTROL to turn List guidance on. # To turn this function off, press MULTI-CONTROL again. # If the language is set to РУССКИЙ in the Language select, this function cannot be performed. Switching the dimmer setting To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off. 1 Display the initial setting menu. Refer to Adjusting initial settings on page 49. 2 Use MULTI-CONTROL to select Dimmer in the initial setting menu. 3 Press MULTI-CONTROL to turn dimmer on. # To turn dimmer off, press MULTI-CONTROL again. Initial Settings 51 En Section 11 Initial Settings Adjusting the brightness You can adjust the display brightness. 1 Display the initial setting menu. Refer to Adjusting initial settings on page 49. 2 Use MULTI-CONTROL to select Brightness in the initial setting menu. 3 Push MULTI-CONTROL left or right to adjust the brightness level. 0 to 15 is displayed as the level is increased or decreased. # When dimmer is functioning, the brightness level can be adjusted 0 to 10. Setting the rear output and subwoofer output This unit’s rear output (rear speaker leads output and RCA rear output) can be used for full- range speaker (Rear SP :F.Range) or subwoofer (Rear SP :S/W) connection. If you switch the rear output setting to Rear SP :S/W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the unit is set for rear full-range speaker connection (Rear SP :F.Range). 1 Display the initial setting menu. Refer to Adjusting initial settings on page 49. 2 Use MULTI-CONTROL to select S/W control in the initial setting menu. 3 Press MULTI-CONTROL to switch the rear output setting. Pressing MULTI-CONTROL will switch between Rear SP :F.Range (full-range speaker) and Rear SP :S/W (subwoofer) and that status will be displayed. # When no subwoofer is connected to the rear output, select Rear SP :F.Range (full-range speaker). # When a subwoofer is connected to the rear output, select Rear SP :S/W (subwoofer). Notes ! Even if you change this setting, there is no output unless you turn the subwoofer out...