Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Kenwood Dateigröße: 545.19 kb Dateiname: Unterrichtssprache:

/ \ < > [ ] Special characters: aaeeiioouuNC®.‹ fl aaeeiioouunc©.› fi NOTE • The number of discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. Up to 30 CDs can be registered with this unit. • Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too. — 30 — • If you want to to display the name, changes. • Pressing the reset button unit, but does not erase Magazine Random Play ( Function of disc changers) Play the tracks on all the discs in the disc changer order. 1 Press the M.RDM button to switch magazine random and off. "M.Random ON" is displayed when magazine random play turned on. The disc and track numbers will change over and over in the display as the next track is being selected. When the disc/track has been selected, play will begin. The selected disc/track number blinks in the display as it is being played. 2 To change the track being heard, press the . button. Another disc/track will be selected and played. NOTE • Magazine random play is canceled when you eject the disc. • The time needed for random selection depends on the number of discs loaded in the disc magazine. Function of the Direct Track Search (Function of Remote) Using the remote, directly want to listen to. 1 Using the number buttons on the track that you want to listen The selected track number will blink seconds. If you make no further input in the 10-number entry mode will automatically be 2 Press either the 4 or . button while the track number is blinking. The track starts playing. Canceling Direct Track Search While It Is Operating: Press the 38 button. NOTE You cannot use the direct track search function during random magazine-random play. — 31 — CD/External English Function of the Direct Disc Search (Function of disc Using the remote, directly want to listen to. 1 Using the number buttons on the disc that you want to listen The selected disc number will blink seconds. If you make no further input in the 10-number entry mode will automatically be NOTE • Input "0" to select disc 10. • If you input more than two numbers all at once, made only of the last number input. • You cannot use the direct disc search function during play or magazine random play. 2 Press either the DISC+ or DISC– button while the number inputted is blinking. The disc starts playing. Canceling Direct Disc Search While It Is Operating: Press the 38 button. Disc Name Preset Play (DNPP) (Function of Remote) If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it. 1 Press the DNPP button on the remote. "DNPP" will appear in the display, and the disc name preset play mode is entered. The names of all the discs in the disc changer will appear successively in the display for five seconds each. Discs whose names have not been preset will appear as "NO NAME" in the display. NOTE • This function can only manufactured or sold cannot provide a display made by the unit that is playing. • Discs in the disc changer that will appear as "NO ACCESS" when displayed. When you cannot identify ACCESS" display after inserting a disc display the disc name. Also note that displayed when a disc has not been loaded. Rapid display (forward / reverse): Press the DISC+ or DISC– button. Pressing the DISC+ button will rapidly display the preset names/disc titles in order. Pressing the DISC– button will rapidly display the preset names/disc titles in reverse order. 2 When the name appears for the disc you want to play Press the OK button. The disc whose name is displayed will be recalled, and the disc name preset play (DNPP) mode will end. To cancel DNPP mode: Press the DNPP button. The disc name preset play (DNPP) mode will be canceled. — 32 — Menu settings 38 PTYLOUDOFFAUDAMEMENUANGNAMEDISP AUTO DISP MENU AM#1-6 4 KDC-X917/X817/9017 Menu display KDC-X717 Menu display (KDC-X917/X817/ FM . Description about by setting the Lower indicator." SRC Menu System You can set the defaults for additional mode. Make a setting for each function, following operations. 1 Enter the menu mode Press the MENU button for at least one second. "MENU" is displayed when the menu mode is entered. The function that you can adjust is indicated with the settings displayed. 2 Selecting function to set Press the FM button to search through the functions until you see the one you want to adjust in the display. Press the AM button to search through the functions backward. Function items change in the order of features that follow in the menu system. Example: If you want to switch the setting of the touch sensor tone function from on to off, first search through the functions until you see "Beep ON" in the display. 3 Changing setting for currently displayed function Press either the 4 or . button. The setting ...

Herunterladen

Geben Sie zwei Ziffern: