Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
3 Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [4] or [.] button. 4 Exit Clock adjustment mode Press the [MENU] button. 48 | English Menu system When hands free unit connecting; In Standby mode Phone voice speaker setting Selecting the speaker to output the Phone voice. Display Setting "SP SEL: ALL" Phone voice sent to the front and rear speaker. "SP SEL: F-Right" Phone voice send to the front right speaker. "SP SEL: F-Left" Phone voice sent to the front left speaker. When hands free unit connecting Microphone sensitivity adjust Adjusting the volume of the Microphone. Display and Setting "HF MIC ADJ: 00" … "HF MIC ADJ: 15" (Original setting) … "HF MIC ADJ: 31" When hands free unit connecting Auto Response time Adjust Setting the time from an incoming call to the automatic response. Display and Setting "Wait Time: OFF" "Wait Time: 1s" … "Wait Time: 5s" (Original setting) … "Wait Time: 30s" • If the time set in the GSM telephone is shorter than that set in the unit, the former will be used. Date Adjustment 1 Select Date Adjust mode Press the [FM] or [AM] button. Select the "Date Adjust" display. 2 Enter Date Adjust mode Press the [4] or [.] button for at least 1 second. The date display blinks. 3 Selecting the item (day, month, or year) to adjust Press the [4] or [.] button. The items that are blinking are items that can be adjusted. 4 Adjust each item Press the [FM] or [AM] button. 5 Repeat step 3 and 4 operation and adjust the date. 6 Exit Date adjustment mode Press the [MENU] button. Date Mode Setting the date format. 1 Select Date Mode Press the [FM] or [AM] button. Select the "Date Mode" display. 2 Select the date format Press the [4] or [.] button. Synchronize Clock Synchronizing the RDS station time data and this unit’s clock. Display Setting "SYNC: ON" Synchronizes the time. "SYNC: OFF" Adjust the time manually. • It takes 3 to 4 minutes to synchronize the clock. English | 49 DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display Setting "DSI: ON" LED flashes. "DSI: OFF" LED OFF. Selectable Illumination Selecting the button illumination color as green or red. Display Setting "Button: Red" The illumination color is red. "Button: Green" The illumination color is green. Triangle indicator setting Sets the blinking mode during triangle indicator system adjustment (such as audio control, audio setup, multi-key system setup). Display Setting "TRIAGL Blink:ON" The Triangle indicator blinks. "TRIAGL Blink:OFF" The Triangle indicator does not blink. Font Type Select Selecting the display font. 1 Select Font Type Select Mode Press the [FM] or [AM] button. Select the "Font Select" display. 2 Select the font Press the [4] or [.] button. Dimmer Dimming this unit’s display automatically when the vehicle light switch is turned ON. Display Setting "Dimmer: ON" The display dims. "Dimmer: OFF" The display doesn’t dim. OFF Wait Time Setting Setting the time until the faceplate hide operation starts after the power is turned OFF. The faceplate can be removed only during the set time period. Display and Setting "Off Wait : 0sec" … "Off Wait : 3sec" (Original setting) … "Off Wait : 25sec" In Standby mode Eject angle setting This function sets the opening and closing operation of a panel when a disc is inserted and when it is ejected. Display Setting "Eject ANG: Slope" Opens and closes the panel while maintaining the angle of the control panel to the set angle. "Eject ANG: Level" Opens and closes the panel after setting the angle of the control panel to the horizontal position. 50 | English Menu system In Standby mode Panel action setting Sets the panel movement when the panel action (back/forward movement) is set to its most end position. Display Setting "Panel Control:1" No angle can be adjusted if the panel position has been set to its most end position. Also, if you have set the angle below the horizontal position, the angle is set to horizontal when you set the panel to its most end position. "Panel Control:2" The angle can be adjusted regardless of the panel position. Function of the KDC-W8027 System Q Setting Setting whether the display indicates the System Q factors (Bass center frequency, Bass Q factor, Bass extend, Middle center frequency, Middle Q factor, and Treble center frequency) in Audio control. Display Setting "System Q: ON" The System Q factors are displayed. "System Q: OFF" The System Q factors aren’t displayed. Function of the KDC-PSW9527/KDC-W9027 Audio Setup Switches between the Easy mode and PRO mode (for detailed setup) during Audio setup. Display Setting "Audio Setup:Easy" Selects the quick Audio setup. "Audio Setup:PRO" Selects the detailed Audio setup. • Refer to 'Audio Setup (Easy)' (page 28) and 'Audio Setup (PRO)' (page 30). "Audio Setup:Easy" : [CABIN] [SP-SEL] [SP-LEV] [CALL] "Audio Setup:PRO" : [X’over] [DTA] [EQ] [SP-LEV] [MEMORY] [CALL] In Standby mode Built-in Amp Mute Setti...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - KDC-PSW9527 (892.66 kb)
Car-Receiver - KDC-W9027 (892.66 kb)