Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Kenwood Dateigröße: 682.3 kb Dateiname: Unterrichtssprache:

When the track has been selected, play will begin. The selected track number blinks in the display as it is being played. NOTE (For disc changers) When all the tracks on a certain disc have been played using random play, the next disc on the changer will start playing using the same function. 2 To change the track being heard, press the . button. Another track will be selected and played. — 22 — NOTE 2 Pressing the DISP Random play is canceled scrolling display of NOTE Magazine Random Play ( Function of disc changers) Play the tracks on all the discs in order. 1 Press the M.RDM button to switch magazine and off. "M.Random ON" is displayed when magazine turned on. The disc and track numbers will change over and display as the next track is being selected. When the disc/track has been selected, play will begin. The selected disc/track number blinks in the display as it being played. 2 To change the track being heard, press the . button. Another disc/track will be selected and played. NOTE • Please see the menu settings between manual scrolling • Only units with a CD text feature • You cannot be the text scroll function play. • Magazine random play is canceled when you eject the disc. • The time needed for random selection depends on the number of discs loaded in the disc magazine. Text / Title Scroll This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll automatically: Press the DISP button to display the disc title or the track title. The display of the text will be scrolled repeatedly. To scroll manually: 1 Press the DISP button to display the disc title or the track title. — 23 — CD/External Presetting Disc (except for KDC-letters using the Store the names of Example: Use the following 1 Play the disc whose name English NOTE • This function is not available for feature the Disc Name Preset function. • The Disc Name Preset function cannot Magazine random play as well as while is displayed. 2 Press the NAME.S button for at least two "NAME SET" is displayed and the disc name preset entered. The cursor blinks in the position where character made. 3 Press either the 4 or . button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the . button to the right. You can also move the cursor left or right by pressing the 4 or . buttons, respectively, on the remote. 4 Each press of the 38 button results in the type of characters that are to be entered changing between alphabet and numerals/symbols. Press the FM or AM button to display the desired character. Characters that can be displayed are as follows. Alphabet (upper case): A ~ Z Alphabet (lower case): a ~ z Numerals and symbols: 0~9 @ ” ‘ ` % & . + - = , . / \ < > [ ] Special characters: aaeeiioouuNC®.‹flaae eiioouunc©.› fi NOTE Direct Alphabet Input (Function of remote with number/letter entry buttons) If the disc changers that were manufactured and sold after 1997 Character Button to press # Times pressed “ D” #3 1 “ A” #2 1 “ N” #6 2 “ C” #2 3 “ E” #3 2 5 Continue steps 3 and 4 until all the characters are the name. NOTE You can enter up to 12 characters for each name. 6 Press either the NAME.S button on the main unit or the OK button on the remote. The disc name is stored and the disc name preset mode is canceled. If you make no entry in a 10-second period, the name will be stored with the characters input so far. NOTE • The number of discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. Up to 30 CDs can be registered with this unit. • Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too. • If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes. • Pressing the reset button erases the disc names stored in this unit, but does not erase the names stored in a disc changer. — 24 — Disc Name (Function of Remote) Direct Track (Function of Remote) If you have preset the in the disc changer, you playing it. 1 Press the DNPP button on the "DNPP" will appear in the display, play mode is entered. The preset names/disc titles of the disc which you are currently listening are successively five seconds each. In any of the units that are connected, discs that been disc name preset will display "NO NAME". NOTE • This function can only be used in disc changers that were manufactured or sold as of 1997. Also note that some units cannot provide a display unless the disc name preset has been made by the unit that is playing. • Discs in the disc changer that have never been played before will appear as "NO ACCESS" when the disc names are displayed. When you cannot identify a disc because of the "NO ACCESS" dis...

Herunterladen

Geben Sie zwei Ziffern: