Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Kenwood Dateigröße: 572.03 kb Dateiname: Unterrichtssprache:

Refer to (page 4). How to reset your unit • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. 1. Release the faceplate lock so that it can be removed. Refer to (page 6) 2. Press the Reset button and reattaching the faceplate. Reset button Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. ¤ • Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. About the Terminals of the Unit and Faceplate • To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers. • If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth. Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Notes • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters which can be displayed by this unit are A-Z 0-9 @ “ ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } | ~ . • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable. Handling CDs • Do not touch the recording surface of the CD. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the center of the disc and move outward. • When removing CDs from this unit, pull them out horizontally. • If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc. CDs that cannot be used • CDs that are not round cannot be used. • CDs with coloring on the recording surface or CDs that are dirty cannot be used. • This unit can only play the CDs with . This unit may not correctly play discs which do not have the mark. • You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/ CD-RW recorder instruction manual.) • 3 inch CD cannot be used. Attempt to insert using an adapter can cause malfunction. English | 3 Basic Operations ] Release [SRC] [DISP] Disc slot [..] USB Terminal [ ] Auxiliary input [BAND] [VOL] [..][..] [1][2] [3][4] [5][6] [ Before Using Exit of the Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. 1 Press the [VOL] knob to quit the demonstration mode when the messages “CANCEL DEMO”, “PRESS”, “VOLUME KNOB” are displayed (approx. 15 seconds). 2 Select “YES” and press the [VOL] knob. When “NO” is selected, turn the [VOL] knob. . • Demonstration mode can also be cancelled in “DEMO MODE” of (page 8). Adjusting the Clock 1 Press the [DISP] button several times until clock display (“CLOCK”) appears. 2 Keep pressing the [DISP] button until the hour display blinks. 3 Turn the [VOL] knob to adjust the hour. 4 Press the [VOL] knob to finish the hour adjusting. The minute display blinks. 5 Turn the [VOL] knob to adjust the minute. 6 Press the [VOL] knob to finish the minute adjusting. Common Operation Power and source select Turns the power ON by pressing the [SRC] button. When power is ON, pressing the [SRC] button switches among playable sources in the following order: Tuner (“TUNER”) . USB (“USB”) or iPod (“iPod”) . CD (“CD”) . Auxiliary Input (“AUX”) . Standby (“STANDBY”) . Tuner (“TUNER”) Keeping pressing the [SRC] button for at least 1 second turns the power OFF. . • The source “iPod” and “CD” can be selected when each source is ready to play. Volume Turning the [VOL] knob adjusts the sound volume. Clock display and Display scroll Pressing the [DISP] button selects the display mode. Refer to (page 7). Keeping pressing the [DISP] button scrolls the display. Auxiliary input Portable audio device can be connected with the stereo mini-plug (3.5 mm o). 4 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Playing Music (CD/USB/iPod) Playing Disc Insert a disc ...

Herunterladen

Geben Sie zwei Ziffern: