Anleitung Kenwood, modell KDC-5024
Hersteller: KenwoodDateigröße: 2.52 mbDateiname:
Unterrichtssprache:
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
? The TEL mute function turns ON even though the TEL mute wire is not connected. . The TEL mute wire is touching a metal part of the car. . Pull the TEL mute wire away from the metal part of the car. ? Even if Loudness for. . Tuner source is selected. . High-pitched tone isn't compensated source. ? No sound can be heard, or the . The fader or balance settings are . Center the fader and balance settings. . The input/output wires or wiring harness . Reconnect the input/output wires or the See the section on . . The values of Volume offset are low. . Turn up the Volume offset, referring to the section on (page 9). ? The sound quality is poor or distorted. . One of the speaker wires is being pinched by a screw in the . Check the speaker wiring. . The speakers are not wired correctly. . Reconnect the speaker wires so that each output terminal is connected to a different speaker. ? There’s no Front High Pass Filter and Rear High Pass Filter effect. . The Non-fading preout is being used. . There’s no effect in Non-fading preout. ? The Touch Sensor Tone doesn’t sound. . The preout jack is being used. . The Touch Sensor Tone can’t be output from the preout jack. ? Even though Synchronize Clock is ON, the clock can’t be adjusted. . The received RDS station isn’t sending time data. . Receive another RDS station. ? The Dimmer function doesn’t work. . The Dimmer wire isn’t connected correctly. . Check the Dimmer wire connection. ? The display color changes subtly. . This is because the temperature is different than the temperature when the setting was done. . The display color condition changes subtly according.to the ambient temperature. — 35 — English English ? Non-fading output, setting can’t be done. . The . Set it on Non-fading preout. . The (page . Turn it ON. Tuner source ? Radio reception is poor. . The car antenna is not extended. . Pull the antenna out all the way. . The antenna control wire is not connected. . Connect the wire correctly, referring to the section on . ? It isn't the set Traffic information sound volume. . The set sound volume is less than the tuner sound volume. . If the tuner sound volume is louder than the set sound volume,the tuner sound volume is used. Disc source ? "AUX1" is displayed without achieving External disc control mode. . Unsupported disc changer is connected. . Use the disc changer mentioned in the IMPORTANT INFORMATION of the section on (page 3). ? The specified disc does not play, but another one plays instead. . The specified CD is quite dirty. . Clean the CD. . The disc is loaded in a different slot from that specified. . Eject the disc magazine and check the number for the specified disc. . The disc is severely scratched. . Try another disc instead. ? A CD ejects as soon as it is loaded. . The CD is quite dirty. . Clean the CD, referring to the CD cleaning of the section on (page 5). ? Can’t remove disc. . The cause is that more ACC switch was turned . The disc can only be removed switch being turned OFF. If more than 10 minutes has turn the ACC switch ON again ? The disc won’t insert. . There’s already another disc inserted. . Press the [ 0] button and remove the disc. ? Track Search can't be done. . For the discs/folders first or last song. . For each disc/folder, Track Search can't be done in the backward direction for the first song or in the forward direction song. MP3 source ? Cannot play an MP3. . The media is scratched or dirty. . Clean the media, referring to the CD cleaning of the section on (page 5). ? The sound skips when an MP3 is being played. . The media is scratched or dirty. . Clean the media, referring to the CD cleaning of the section on (page 5). . The recording condition is bad. . Record the media again or use another media. ? The MP3 track time isn’t displayed correctly. . -- . There are times when it isn’t displayed correctly according to the MP3 recording conditions. If the following situations, consult your nearest service center: Even though the disc changer is connected, the Disc Changer source is not ON, with "AUX1" showing in the display during the Changer Mode. — 36 — The messages condition. The messages condition. : No disc magazine has been The disc magazine is not completely . Load the disc magazine properly. No CD in the unit. . Insert the CD. No Disc/ NO DISC: No disc has been loaded in the disc magazine. . Load a disc into the disc magazine. TOC Error/ TOC ER: No disc has been loaded in the disc magazine. . Load a disc into the disc magazine. The CDI is quite dirty. The CD is upside-down. The CD is scratched a lot. . Clean the CD and load it correctly. E-05: The CD is upside-down. . Load the CD correctly. Blank Disc/ BLANK: Nothing has been recorded on the MD. No Track/ NO TRACK: No tracks are recorded on the MD, although it has a title. E-15: Media was played that ...
Dieses Handbuch ist für folgende Modelle:
Car-Receiver - KDC-5024V (2.52 mb)
Car-Receiver - KDC-507 (2.52 mb)
Car-Receiver - KDC-5094R (2.52 mb)
Car-Receiver - KDC-6024 (2.52 mb)
)
