Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Kenwood Dateigröße: 543.84 kb Dateiname: Unterrichtssprache:

The time adjusts automatically to the correct local time. NOTE The time is not adjusted when the RDS station you are tuned to is not transmitting a time signal. Choose another RDS station in such a case. Function of the KRC-781R/KRC-789 Selectable Illumination You can switch the color of the button illumination green and red. Display and setting: “Button Green” : The color of the illumination is green. “Button Red” : The color of the illumination is red. Switching Graphic Display This function allows you to display if there is too much Display and setting: "Graphic ON" : The of the display. (Default setting) "Graphic OFF" part of the display — 28 — Contrast Adjustment This adjustment permits easy viewing of the display. Display and setting: "Contrast 0" – "Contrast 10" NOTE The initial setting value is "5". Dimmer You can dim the display. NOTE The dimmer function is not available for units if the dimmer wire is not connected. Display and setting: "Dimmer ON" : The dimmer setting is on. (Default setting) "Dimmer OFF" : The dimmer setting is off. External Amp Control Adjust the bass boost level of the external amplifier main unit. Display and setting: “AMP Bass FLT” : Bass boost level is flat. (Default setting) “AMP Bass +6” : Bass boost level is low . “AMP Bass +12” : Bass boost level is high (+12dB) . NOTE As of December 2000, the power main unit are as follows: KAC-X501F/PS501F/X401M/ Function of the KRC-781R News Bulletin Function with PTY News Timeout Setting You can arrange to have news bulletins interrupt your current listening source, including other radio stations. When the News Bulletin function is on, the PTY News Timeout setting allows you to set the interval during which further news interruption cannot take place. You can adjust the PTY news interruption period from 10 to 90 minutes for each journey. Display and setting: “News OFF” (Default setting) , “News 00min” - “News 90min” (min= minutes) : When you select the news interruption timeout interval, the News function turns on and the NEWS indicator lights up. When a news bulletin is received, “News” will be displayed and reception will begin at the preset volume. NOTE • If you choose the "20min" setting, further news bulletins will not be received for 20 minutes once the first news bulletin received. • This function is only available if the desired station sends code for news bulletin or belongs to -Network sending PTY-code for news bulletin. • If you turn on the news bulletin function in the band, the band is switched automatically to the FM However, the MW/LW band is not returned to when you turn off the function. Function of the KRC-781R Local Seek Function With the local seek function stations with relatively Display and setting: "Local.S ON" : The local seek function "Local.S OFF" : The local seek — 29 — Menu settings English Function of the KRC-781R Selecting Tuning Mode You can choose from three tuning modes: auto seek, preset station seek, and manual. The "AUTO 1" indicator lights up when auto seek tuning is selected, and the "AUTO 2" indicator lights when preset station seek tuning is selected. Display and setting: "Auto 1" : Auto seek tuning mode (Default setting) "Auto 2" : Preset station seek tuning mode "Manual" : Manual tuning mode Function of the KRC-781R Auto Memory Entry You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six frequencies can be stored this way. Display and setting: 1 Select the display "Auto-Memory" during the selecting in the menu system. 2 Press either the 4 or . button for at least two seconds to start auto memory function. The numbers of the preset station buttons When all the stations in a certain band are memory, the auto memory entry stops. The tuner the last station received. NOTE • When the AF function is turned takes place, only RDS stations capability) are stored. RDS FM1 cannot also be preset • When the local seek entry takes place, • When the Traffic Information traffic information Canceling Auto Memory Entry During Its Operation: Press the 4/ . button while auto memory entry is taking place to stop the process. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed. Function of the KRC-789/KRC-689 Clean Reception System Circuit (CRSC) Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. Display and setting: "CRSC ON" : The CRSC is on. (Default setting) "CRSC OFF" : The CRSC is off. NOTE Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned on. In such a situation, turn it off. Function of t...

Herunterladen

Geben Sie zwei Ziffern: