Anleitung Kenwood, modell KRC-535
Hersteller: KenwoodDateigröße: 564.99 kbDateiname:
Unterrichtssprache:
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Anleitung Zusammenfassung
When it’s ON, the "ATT" indicator blinks. Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Display Flat "Flat" Rock "Rock" Top 40 "Top 40" Pops "Pops" Jazz "Jazz" Easy "Easy" Scan of Flat — Easy "Scan" User memory " User" • User memory: The values set on the (page 6). • Each setting value is changed with the (page 7). First, select the speaker type with the Speaker setting. Loudness Compensating for low and high tones during low Press the [LOUD] button for at least 1 second. Each time the button is pressed for at least 1 Loudness turns ON or OFF. When it's ON, "LOUD ON" is displayed. System Q You can recall the best sound the music. 1 Select the source Press the [SRC] 2 Select the Audio Control 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed switch as shown below. 4 Adjust the Audio item Press the [ 4] or [ . ] button. Adjustment Item Display Range Bass level "Bass" –8 — +8 Middle level "Middle" –8 — +8 — 6— Treble level Treble level –8 — +8 Balance "Balance" Left 15 — Right 15 Fader "Fader" Rear 15 — Front 15 Volume offset "V Offset" –8 — ±0 Volume offset: Each source's volume can be set as a difference from the basic volume. 5 Exit Audio Control mode Press the [AUD] button. Switching Display Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Display Frequency Station name "SNPS" In Tape source Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker Setting mode Press the [Q] button. 3 Select the Speaker type Press the [ 4] or [ . ] button. Each time the button is pressed the setting below. Speaker type Display OFF "SP OFF" For 6 & 6x9 in. speaker "SP 6*9/6inch" For 5 & 4 in. speaker "SP 5/4inch" For the OEM speaker "SP O.E.M." 4 Exit Speaker Setting Press the [Q] Information Play side & Tape counter Play side & Tape running Play side In External disc source Information Track Time Disc name Disc title Track title Display "DNPS" "D-TITLE" "T-TITLE" — 7— General features General features Switching Clock Display Switching the displayed information. Press the [CLK] button. Each time the button is pressed it switches between clock display and current source. During clock display the clock indicator is ON. Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD. 1 Receive/play the station/disc you want to attach a title to • A title can't be attached to a MD. • Disc Naming can't be done during CD text display. 2 Enter name set mode Press the [NAME.S] button for at least 2 seconds. "NAME SET" is displayed. 3 Move the cursor to the enter character position Press the [ 4] or [ . ] button. 4 Select the character type Press the [ 38] button. Each time the button is pressed the character shown below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters ( 5 Select the characters Press the [FM] Characters can be entered by using a remote with a number buttons. Example: If "DANCE" is entered. Character Button #Times pressed "D" [#3] 1 "A" [#2] 1 "N" [#6] 2 "C" [#2] 3 "E" [#3] 2 6 Repeat steps 3 through 5 and enter the name. 7 Exit name set mode Press the [NAME.S] button. • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Memory numbers - FM: 32 stations - AM: 16 stations - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • The title of station/CD can be changed by the same operation used to name it. Auxiliary Input Display Setting Selecting the display when this input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display. 2 Enter Auxiliary Press the [NAME. The presently — 8— 3 Select the Auxiliary input display 3 Select the Auxiliary input display Each time the button is pressed it switches through the below displays. • "AUX" • "TV" • "VCP" • "GAME" • "PORTABLE" 4 Exit Auxiliary input display setting mode Press the [NAME.S] button. When operation stops for 10 seconds, the name at that time is selected, and Auxiliary input display setting mode closes. Faceplate Angle Adjustment Press the [ANG] button for at least 1 second. • Do not apply excessive force to the faceplate. It can cause damage. • The faceplate angle cannot be adjusted during tape play. When the faceplate is kept remove open, according to the (page 21) setting, the faceplate is hidden and The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detac...
)
