Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Bosch Dateigröße: 103.02 kb Dateiname: Unterrichtssprache:

Press P Display shows the first standard off-time (programme step 2) Press HR & MIN buttons for your required off time. Use buttons P HR and MIN as above for next weekday switch period, then the two weekend periods, finishing with programme step 8. Odd programme step numbers are on times and even numbers are off times. Set right switch to CH and repeat above for all central heating programmes. Set right switch to RUN. NOTE: The standard programme also contains further programme steps 9-16. These should be ‘switched off’ ie the display should flash 0.00 at each of these steps. To check this press P again to view these switch points. If required, these can be switched off by pressing ADV then P TOGETHER for 5 seconds, then release the buttons. In case of confusion or errors you can completely reset the programmer. See ‘Reset’ section. FULL-FUNCTION PROGRAMME SETTING It is possible to set your programme requirements to 8 switch periods (per channel) over combinations of days, weeks and weekends. Set right switch to DHW. Use the P , DAY, HR and MIN buttons to create the desired programme times as follows; P to step to the next switch time. DAY to set the day (or days) at which the switch time occurs HR & MIN to set the hours and minutes for the switch time. Set right switch to CH and repeat above for all central heating programmes. Right switch to RUN. IMPORTANT NOTES An ‘odd’ programme step number is always the ON time. An ‘even’ programme step number is always the corresponding OFF time. Hence the eight switch periods are programme steps 1-2, 3-4, 5-6, 7-8, 9-10, 11-12, 13-14, 15-16. The day (or days) setting must be indentical for the on time and corresponding off time. TO VIEW PROGRAMME TIMES Set right switch to DHW or CH as required. Repeatedly press P to scroll through the on and off times (or keep P depressed and the unit automatically scrolls through the switch times). If switch times are to be changed, simply use HR and MIN buttons when displayed. Set right switch to RUN. NORMAL RUNNING Right switch must be in the RUN position Left switch should be in AUTO position The programmer will automatically operate according to your set programme periods. In addition to actual time and day, various smaller characters may also be displayed on the right of the screen. See Fig 2. ADVANCE FACILITY It is possible to change the programme to the next on or off period in advance of the set time. The switches must be in the AUTO and RUN positions. 3 To advance HW mode, press ADV once. To advance CH mode, press ADV twice. When a channel is ‘advanced’ the symbol appears at the bottom right of the display, and the channel number will change to on (or off). PERMANENT ON Right switch must be in the RUN position. Set left slide switch to I. For permanent HW demand, press ADV once For permanent CH demand, press ADV twice. The channel number will flash for 3 seconds and then stay on. To cancel, set left slide switch back to AUTO PERMANENT OFF Right switch must be in the RUN position. Set left slide switch to O. For permanent HW off, press ADV once For permanent CH off, press ADV twice. When set to permanent off, the selected channel will permanently flash. To cancel, set left slide switch back to AUTO RESET In case of confusion or errors, the programmer can be completely reset by pressing the Reset button with a small implement such as a biro The right switch must be in the RUN position. The display will flash zeros and the programme times will reset to their standard times. Start again at section ‘To Set Present Time and Day’. HELPFUL HINTS Channel 1 is DHW, channel 2 is CH. If you get stuck whilst programming, set right switch to RUN then back to DHW (or CH) . An ‘odd’ programme step number is always the ON time. An ‘even’ programme step number is always the corresponding OFF time. . For every odd number (on time) the corresponding even number (off time) must use the same day(s). 4 WORCESTER HEAT SYSTEMS LTD (Bosch Group) Cotswold Way, Warndon, Worcester WR4 9SW. Tel: 01905 754624 Fax: 01905 754619 This booklet is accurate at the date of printing but will be superseded and should be disregarded if specifications and/or appearances are changed in the interests of continued improvement. All goods sold are subject to our official Conditions of Sale, a copy of which may be obtained on application 8 716 115 024a (05/08) ...

Herunterladen

Geben Sie zwei Ziffern: