Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
2 Install the battery on the battery holder. 3 Install the battery holder back into its original position. Note • Use only one CR2025 (3V) lithium battery. • Remove the battery if the remote control is not used for a long period of time. • Do not leave the product in a hot or humid place. • Do not handle the battery with metallic tools. • Do not store the battery with metallic materials. 6 Installation Basic Installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 1 Remove the existing receiver unit. 2 Make the necessary connections. 3 Install the installation sleeve. 4 Install the unit into the installation sleeve. Removing the existing receiver unit Bend the claws according to the thickness of the dashboard Control panel A A ISO-DIN Installation If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. 1 Remove the rear support from the unit. 2 Remove the control panel and trim ring from the unit. 3 Insert the lever Ainto the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve. 5 4 3 1 26 Control panel 1 Slide the unit into the ISO-DIN frame. 2 Fit screws removed from the old unit. 3 Slide the unit and frame into the dash opening. 4 Install the dash panel or adapter plate. 5 Install the trim ring to the unit. 6 Install the control panel to the unit. 7 Connection diagram Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits. B 1 2 3 5 7 4 6 8 1 3 5 7 2 4 6 8 To Speaker To Vehicle 8 BATTERY POWER Antenna DIMMER SWITCH IGNITION SWITCH CONTROL RELAY REMOTE ON (BLUE/WHITE) AMPLIFIER (Optional) PHONE MUTE (ORANGE) DIMMER (PINK) TO IGNITION (RED) GROUND(-) (BLACK) POWER ANTENNA (BLUE) TO BATTERY(+) (YELLOW) A A A A A A A A 1 2 4 5 6 7 8 1 2 3 4 5 6 7 8 AABB B 11. Violet : Rear Right + B 22. Violet/ Black Stripe : Rear Right – B 33. Gray : Front Right + B 44. Gray / Black Stripe : Front Right – B 55. White : Front Left + B 66. White/Black Stripe : Front Left – B 77. Green : Rear Left + B 88. Green/ Black Stripe : Rear Left – A AAFrom antenna B BBTo the wiring of the vehicle colors of leads. • BLACK: This lead is for the ground connection. • ORANGE: This lead is for the phone line connection. • PINK: This lead is for the dimmer line connection. • RED: This lead is for connection to the power supply terminal when the ignition switch is set to ACC. • YELLOW: This lead is for connection to the battery (back-up) terminal from which power is always supplied. • BLUE: This lead is for the power antenna connection. • BLUE/WHITE: This lead is for the remote amplifier on connection. C CCSpeaker Connections L LR R 1 2 3 4 5 6 7 8 REARFRONT FRONT REAR Connecting to Auxiliary Equipment (Optional) Connect the AUDIO OUTPUT jack of this unit to the AUDIO INPUT jack of the Auxiliary Equipment. FL (Front Left) FR (Front Right) RL (Rear Left) RR (Rear Right) To AUDIO OUT To AUDIO INTo AUDIO IN Amplifier 9 Basic operation Turning the unit on Press MUTE/PWR (POWER/ on the remote control) or any other button. Note When you insert the CD in the CD slot, the unit turns on. Turning the unit off Press and hold MUTE/PWR and then Press and hold MUTE/PWR one more time(POWER/ on the remote control). Note When the demo function is “off”, press and hold MUTE/PWR. Insert a disc 1 Press to open the control panel. 2 Draws the disc, and starts playback automatically. Eject a disc Press to open the control panel. The disc automatically ejects from the loading slot. When the disc is ejected by pressing during playback, it will be loaded automatically after 10 seconds unless you pull out disc from the unit. Selecting a source Press SOURCE repeatedly to select a source. The indicator lights up in the following order. TUNER > CD > USB > TUNER... Note You cannot select a source if is not ready. Adjusting the volume Rotate MUTE/PWR (Press VOLUME on the remote control) to adjust the sound level.(0 - 35) Note When you turn the unit off, the current volume level is automatically memorized. Whenever you turn the unit back on, it will operate at the memorized volume level. Mute 1 Press MUTE/PWR (POWER/ on the remote control) to cut the sound. 2To cancel it, press again or any other buttons. Checking the clock You can see the clock pressing DISP (DISP. on the remote control). 10 Changing the general settings 1 Press and hold MENU (MENU/SEL on remote control) to enter the menus. 2 Press U UU/AS or u uu/PS (U UU/u uu on remote control) to scroll between menus. RDS y Display y Setup 3 Press I II or i ii (?m m/M M? on remote control) and Press U UU/AS or u uu/PS (U UU/u uu on remote control)to select one of the settings specified belows. 4 Press MENU (MENU/SEL on remote control) to finish the setting. • RDS AF(Alternative frequency) When the reception quality drops, the tuner automatically...