Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
(^ page 15) Dimmer- (Display Brightness Setting Range) Press [DIM] on the main unit to change the dimmer level. : Bright Default : Medium : Dark G.QSD F,8 DilV D F.XflOil 7 D E6 Oil ill a -Display Change When Power is ON Press [DISP]. Mode display Mode and spectrum analyzer display Spectrum analyzer display If you press a button, the mode and spectrum analyzer display appear for 5 seconds. Mode and clock display Display and light off (when it is turned on.) Q5 N y°u Press a button, the light is turned on, the mode display . j appears for 5 seconds, and the light is turned off again. Press and hold [DISP] for more than 2 seconds. • The audio indicator is displayed for 15 seconds and returns to the previous display. • When the indicator lights, the audio function (S*HDB/SUB*W) is now activated. Press [DISP] again to cancel. When Power is OFF Press [DISP]. mim Clock display Display and light off Notes: • Set the spectrum analyzer pattern in a separate procedure. (=* page 24) : Displays before adjusting the clock. (=> page 24) SDÎIvJSflï CQ:DE80if/D F,X*7Qir/Dfi6 0.1.U 15 Radio Radio Mode- Press [SOURCE] to change to the radio mode. Band Press [BAND] to change the band. Source FM1 FM2 FM3 I AM Radio mode display KM №u ï Ç0Ü a i FM stereo indicator CD RECEIVER WliTH FULL DOT MATRIX DISPLAY Tuning [TUNE >]/[>]: Up [TUNE <]/[<]: Down Press and hold [TUNE >] or [TUNE <]/[>] or [<] for more than 0.5 seconds, then release. Seeking will start. Direct Memory Your favorite radio station can be memorized in [D*M] on the main unit. Default: FM 87.9 MHz Memorize POWER [SOURCE] —F-©) [A][V]. {PRESET MEMORY) (SELECT) o © RANÖ © © SCAN HEP êS V -[1] to [6] Preset button [BAND] [<][>] (TUNE) J *| Select a band and frequency (steps (fl), © and ®). 2 Press and hold [D-IVI] for more than 2 seconds. Frequency blinks once and is saved in the memory. Note: • The new station is overwritten on existing saved stations after following this procedure. Recalling the Direct Memory Press [D*M]. Eß„@ EBB ©j Press [D*M] again to cancel and return to the previous source. Note: • You can recall the direct memory when the power is off. G.QID Fi8 Oil VO F,X*7Q1 r/D E6Qi1U One-Touch Selection of a Preset Station Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories. Manual Preset Memory Manually save a station in the preset memory Auto Preset Memory (APM) Automatically save strong stations in the preset memory “j Select a band and frequency (steps (JD, © and © on the previous page). 2 Press and hold [P. SET a] or [P. SET v]/[a] or [v] for more than 2 seconds until the preset number blinks. 3 Press [P. SET a] or [P. SET v]/[a] or [ v] to select a preset number. 4 Press and hold [P. SET a] or [P. SET v]/[a] or [v] for more than 2 seconds to memorize. • The display blinks once, and a re- ¿TQl ^ ceiving station is saved in the ■--**■—T- ■ — —----------J memory. Preset number Note: • Frequency setting can be performed even after selecting a preset number. Entering Numbers Directly from the Remote Control “I Select a band and frequency (step (JD. © and © on the previous page). 2 Press and hold [1] to [6] on the remote control for more than 2 seconds to memorize. “J Select a band (steps (JD and © on the scanning’ previous page). 2 Press and hold [BAND] (APM) for more than 2 seconds. • The 6 strongest available stations will be automatically saved in the memory under preset number 1 to 6. • Once set, the preset stations are sequentially scanned for 5 seconds each. • Press [P. SET a] or [P. SET v]/[a] or [v] for the broadcast you want to listen to. (Press [1 ] to [6] on the remote control.) Note: • New stations are overwritten on existing saved stations after following this procedure. Preset Station Calling ■] Select a band (steps (3) and © on the previous page). 2 Press [P. SET a] or [P. SET v]/[a] or [v] to select the preset number for tuning in the preset station. Entering Numbers Directly from the Remote Control Press [1] to [6] on the remote control. CD Player Disc Insert and Playback Open the front panel. Press [OPEN] on the front panel. Insert the disc.- Close the front panel manually. Playback will start automatically. When CD is in the player Press [SOURCE] to change to CD player mode. Notes: • roi- Do not insert a disc when this indicator lights. • Loading a CD when the power is off allows the power to be turned on. • Ejecting the CD when the unit is in the CD player mode allows the power to be turned off. Stop and Disc Eject Close Label side CD player mode display 0332 HUB 01? i ©n <3> Play setting Lights when the disc is loaded Blinks when the disc is played. Press [A] (EJECT) to stop CD play and eject the disc. Listening to a CD Pause- Press [BAND] (!!/►) during CD playing. Press [BAND] (!!/►) again to cancel. CD Player Mode Press [SOURCE] to change to CO playe...