Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
CD slot for internal deck 4. Display of variable key functions. The selections options change depending on the operating mode. 5. Indicator lamp for the anti-theft protection 6. Function key for the radio and CD modes 7. Radio presets and direct CD selection for CD changer operation. (optional) 8. Manual station selection / Track search (CD operation) 9. Audio adjustments (bass, treble, balance and fader) Anti-Theft protection The unit is protected by a code. For US operation please use the 5 digit code supplied on the code card. If the 4 digit Europe code is used the radio will not tune into stations properly. To use this unit in Europe, additional programming steps may be required. Store the code card in a secure location outside of the vehicle. You may be required to re-enter the code after servicing your vehicle or when the battery is disconnected. The LED (figure 1 #5) will flash when the ignition is switched off. You can apply the security stickers to the vehicles door windows for additional theft protection. Entering the code number: When power is supplied to the unit the display should look like this: Use the station preset keys 1-6 (figure 1 # 7) to enter the 5 digit code. For example, if the code is 63251, press 6 key followed by the 3,2,5 & 1 key. When the entire code has been entered press:(figure 1 # 8)to the right to confirm. (right arrow) If the code is entered incorrectly more than 3 times, the unit will not allow another code to be entered. The display will show: If this happens you must leave the vehicles ignition and radio on for 1 hour. After 1 hour you may re-enter the proper code. RADIO OPERATION Each touch of the FM or the AM button will switch between the available bands and AUTOSTORE memory areas. RDS Display: RDS (Radio Broadcast Data System) allows display of station information on the radio. When RDS information is available it will allow you to access station information and program type (PTY). Note: Not all stations broadcast this data and RDS data is only possible under favorable reception conditions. To activate RDS, press the left button under the RDS option. The radio program type will be displayed for a few seconds. Station keys There are 18 storage positions for FM stations and 12 for AM stations. These keys also function as a direct CD selection when this radio is used with the optional CD changer. To program a station to a preset button, tune to the station and hold the preset button you would like to store the station for approx. 3 seconds. Repeat for other presets. Station or Title search These keys are used for radio tuning and CD search operation. Radio Mode: Each press of the search mode keys change increases or decreases the channel frequency. CD Mode: Each press of the search mode keys will fast-forward or rewind the current track of the CD. The Scan function will search the available stations about every 10 seconds. Press to turn on the Scan on or off. Random CD (shuffle) Mode Press the left key to tu...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - CD43 (212.15 kb)
Car-Receiver - CD43 (212.15 kb)
Car-Receiver - CD43 (212.15 kb)
Car-Receiver - CD43 (212.15 kb)