Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The information given is for general guidance only. The terms of warranty demand that this Hands Free Carkit set is installed by an experienced installer. An end-user should never attempt to install this Hands Free Carkit without professional assistance as the installation requires special tools and knowledge. Note: Thoroughly read the manual before beginning the installation procedure. WARNINGS 1. Ensure that the vehicle’s battery is disconnected before you start the installation procedure and that it remains disconnected during the procedure. 2. Do not smoke or use open flames when working near the vehicle’s fuel system. 3. Ensure that the vehicle’s electrical cables, hydraulic lines, fuel lines and safety equipment are not damaged during the installation. 4. Ensure that normal control and operation of the vehicle is not impaired by the installation, particularly the brakes and steering. Ensure that airbag operation is not obstructed. Compatible devices 5. Electronic and other sophisticated systems (for example speed control, ABS anti-lock brake, fuel injection-, navigation-and airbag systems) are relatively immune to malfunction HTC Tornado Noble caused by nearby radio transmissions. Should you experience false operation of these systems Qtek 8310 or are in any doubt whatsoever as to their functionality, please consult the vehicle’s dealer. i-mate Sp5 6. The Hands Free Carkit set is suitable for use only in vehicles with a 12V negative grounding. Use on other supply voltages or alternative polarity will damage the equipment. 7. The PDA should not be left switched on for extended periods without running the vehicle’s engine. Failure to comply could drain the vehicle’s battery. Contents of the Hands Free PDA Carkit set: Handsfree DSP Unit PDA Cradle Rotating Swivel Microphone CHCM-14 Powercable CIPC-14 Screw Sets Optional: Carcomm ENAV GPS Receiver Speaker CHCS-05 Gooseneck Microphone CHFM-14 ISO Power Cable CIPC-26 External Antenna Adaptor CPAA-03 Installation There are some important aspects that require special attention in positioning the carkit’s accessories. The location of the PDA Cradle should be positioned so that the visibility of the PDA’s display is good and the driver is not distracted. The location of the PDA Cradle should allow the driver to easily reach the touchscreen. Under no circumstances should the PDA Cradle prevent the driver from controlling or operating the vehicle in any way. For easy installation there is a Carcomm car specific Safety-Mount® available separately. This allows you to mount the cradle onto your dashboard without damaging it. Some drilling can be neccessary to mount the cradle onto the Safety-Mount®. You can use the pattern to the right to see hole positions. The microphone should be installed as close to the driver’s mouth as possible and attached to a surface that is mechanically quiet. The microphone should be mounted at least 1 meter from the speaker to avoid acoustic feedback. Safety-Mount® pattern © ...
Dieses Handbuch ist für folgende Modelle:Car Audio - i-Mate-Sp5 (951.36 kb)
Car Audio - Qtek 8310 (951.36 kb)