Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Fotos und technische Daten JBL ON Stage Micro II |
Anleitung Zusammenfassung
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following measures: • Increase the separation between the equipment and receiver. • Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by JBL could void the user’s authority to operate the equipment. Battery Disposal Alkaline batteries are considered non-hazardous. Rechargeable batteries (i.e., nickel cadmium, nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials and may pose an unnecessary health and safety risk. In the European Union and other locations, it is illegal to dispose of any battery with household trash. All batteries must be disposed of in an environmentally sound manner. Contact your local waste management officials for information regarding the environmentally sound collection, recycling and disposal of used batteries. IC Statement and Warning This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. 4 jbl on stage micro II easy setup guide Carefully unpack your speaker system and identify all its components. JBL On Stage Micro II, power supply, remote and adapter. Step 2. Move the battery door to the unlocked position to open the battery compartment. or Step 3. Place 4 AAA batteries in the battery compartment. Step 5. Place the appropriate iPhone/iPod adapter onto JBL On Stage Micro II. Place your iPhone/iPod on the docking connector or connect a 3.5mm (1/8") stereo audio cable to the rear of the JBL On Stage Micro II. Connect the audio cable to the audio source. Step 4. Connect the power adapter into the jack labeled “6V DC In” on the rear of the JBL On Stage Micro II and plug the power adapter into a wall outlet or power strip. Step 6. Press the Power button on the back of the JBL On Stage Micro II. A green LED will light when the JBL On Stage Micro II system is on. Step 7. Adjust the volume using (+) to increase and (–) to decrease. Press both to mute the JBL On Stage Micro II. Press either button to unmute. Syncing and transfering files with your computer Make sure your iPhone/iPod is securely docked into the JBL On Stage Micro II. Connect a USB cable (not included) into the USB jack on the back of the unit, connect other end of the USB cable directly to your computer’s USB port. Make sure your iPhone/iPod and iTunes are updated to the latest software version. * Auxilary audio cables not included - + troubleshooting your jbl on stage micro II Technical Specifications Troubleshooting Symptom Possible Problem Solution Frequency Response: 70Hz – 20kHz Power Consumption: 10W Maximum Power Input: 6V/1.5A JBL On Stage Micro II Transducer: (2) 1" Full range per channel Dimensions: Diameter – 6" (150mm) Height – 1-3/4" (38mm) System Weight: 2.22 lb (1.01kg) Battery: Size – AAA Type – Alkaline, NiMh Quantity – 4 DO NOT MIX BATTERY TYPES. DO NOT MIX CHARGED AND PARTIALLY CHARGED BATTERIES. BATTERIES WILL NOT RECHARGE WHILE IN JBL ON STAGE MICRO II. No sound from the JBL On Stage Micro II speaker system No power to the system Power adapter plug is not inserted correctly Ensure that the power supply is connected to a live power source and properly connected to the JBL On Stage Micro II. Note: When the JBL On Stage Micro II is powered, a green power LED on the JBL On Stage Micro II should light up. No volume or low volume Touch the volume “Up” (+) pad on the volume control to unmute and/or increase the system volume level. Note: Touching the volume “Down” (–) pad lowers the system volume. Touching both the (+) and (–) volume control pads at the same time will mute the system. Input source is low Increase the volume level on the audio source device. Low or drained batteries Replace the batteries. iPhone/iPod is paused Press the Play button on the iPhone/iPod or remote control. iPhone/iPod is paused (battery-only mode) Note: If the iPhone/iPod is paused more than 10 minutes, press the JBL On Stage Micro II Power button to turn the unit back on. Press either (+) or (–) to unmute. If you have any questions or need further assistance, please visit These specifications are subject to change without notice. 5 Troubleshooting Symptom Possible Problem Solution No sound from the JBL On Stage Micro II speaker system (continued) The JBL On Stage Micro II has been muted for more than 10 minutes in the...