Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
specification that will guarantee the above iPhone response. iPhone responses can be different on newer models or with newer software. Charging an iPod or iPhone An iPod or iPhone is charged automatically when connected to the system (even when the system is in standby mode). • See the iPod or iPhone display for its battery charging status. • Disconnect the iPod or iPhone if it is not used for an extended period of time after charging is complete. • Charging stops when the battery is fully charged. The battery will deplete naturally. Note: • This function does not work when a Bluetooth® device is connected. • 1 minute before the system switches off, the power indicator blinks. • The setting returns to the default when you disconnect the AC power supply cord. A Standby/on switch [`], [1, POWER] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. B View the iPod or iPhone menu C Select an item D Confirm a selection Set or cancel the auto off function E Select iPod, Internet radio, Bluetooth® or AUX mode Bluetooth® is the default mode except when an iPod or iPhone is connected. F Start Bluetooth® pairing mode Select Bluetooth® link mode Adjust the audio input level in AUX mode G Adjust the volume of the system The setting returns to the default when you disconnect the AC power supply cord. H Mute the sound of the system In iPod mode : The light blue and green status indicators blink alternately. In Bluetooth® mode : The light blue and blue status indicators blink alternately. In AUX mode : The light blue status indicator blinks continuously. This function does not work when the system is pairing or waiting to connect with a Bluetooth® device. Press the button again to cancel. Mute is also canceled when you adjust the volume or when you switch off the system. You can listen to a radio station on the Internet if you install the “vTuner for Panasonic” application on your iPod touch or iPhone. Download this application from the App Store. Note: For compatible iPod touch and iPhone models and instructions on how to use the “vTuner for Panasonic” application, refer to: Preparation Install “vTuner for Panasonic” on your iPod touch or iPhone. Connect your iPod touch or iPhone to the Internet. Go to the Home screen of the iPod touch or iPhone. 1 Connect the iPod touch or iPhone. 2 Press [SELECTOR] to start the application. MUTE SELECTOR iPod MENU OK LINK MODE PAIRING I Start or pause playback J Skip or search track K Power indicator On : The system is on Off : The system is in standby mode L iPod or iPhone dock M Status indicator Green : iPod mode Blue : Bluetooth® mode Light blue : Set or cancel the auto off function Mute function is on Off : AUX mode The green status indicator blinks each time a remote control button is pressed. N [PUSH CLOSE] Press while closing the dock. O Remote control sensor Point the remote control at the remote control sensor, away from obstacles, at a maximum range of 7 m (23 ft) directly in front of the main unit. Amplifier section RMS output power stereo mode Front Ch (both ch driven) 20 W per channel (6 ), 1 kHz, 10% THD Total RMS stereo mode power 40 W FTC output power stereo mode Front Ch (both ch driven) 15 W per channel (6 ), 20 Hz to 20 kHz, 10% THD Total FTC stereo mode power 30 W Terminal section AUX (rear) Terminal Stereo, 3.5 mm (1/8.) jack Speaker section Type 2 way, 2 speaker system (passive radiator) Speaker unit(s) Woofer 6.5 cm (2 1/2.) cone type x 1/ch Tweeter 1.5 cm (5/8.) piezo type x 1/ch Passive radiators 8 cm (3 1/8.) x 2/ch Impedance 6 Bluetooth® section Bluetooth® system specification Ver. 2.1 + EDR Wireless equipment classification Class 2 (2.5 mW) Support profiles A2DP, AVRCP Frequency band 2402 MHz to 2480 MHz (Adaptive Frequency Hopping) Driving distance 10 m (33 ft) line of sight (iPhone 4, at height 1 m (3.3 ft), in MODE 1) General Power supply AC 120 V, 60 Hz Power consumption 16 W Dimensions (W x H x D) 370 mm x 176 mm x 85 mm (14 1/2. x 7. x 3 1/2.) [D = 121 mm (4 3/4.) dock open] [D = 59 mm (2 1/2.) without stand] Mass (Weight) 1.8 kg (9 lb.) Operating temperature range 0°C to +40°C (+32°F to +104°F) Operating humidity range 35% to 80% RH (no condensation) Power consumption in standby mode 0.1 W (approximate) Note: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. Top view Remote control Before using Remove the insulation sheet before you use the remote control for the first time. Replacing the battery Replace the remote control battery when it stops operating or when the range is decreased. Replace with a new battery (CR2025) only. 1 While pressing the stopper, pull out the battery holder. 2 Insert a new battery with the (+) side facing up. 3 Push the battery holder back fully. CAUTION! • Insert with poles aligned. • Do not...