Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
IPod adaptor || ^ || 8GB lÉGBg^GB "n © 20GB40GB ” I® iPod Nano adaptor IPod nano 3rd generation {video) 4GB 8GB I I IPod daisle 80CX 160GB CD 20GB 30GB 40GB60GB ©j 30GB 60GB 80GB iPod nano 1st generation 1GB 2GB 4GB 2nd & 4th generation iPod Nano adaptor El iPod nano * ® 2nd generation (aluminium) 2 GB 4 GB 8GB iPod Mini adaptor □ iPod min 1st / 2nd gen 4GB 6GB LOCATIONS OF CONTROLS Q LEFT SPEAKER Q REMOTE SENSOR Q RADIO RESET button Q RADIO SCAN button~ VOLUME UP button MODE Selector 0 FUNCTION Indicators" Ф IPod adaptor _= 0 RIGHT SPEAKER 0_ AUX IN jack ф DC jack (12V 1.5A -®-+) 0 PLAY/PAUSE button 0 W 8KIP button 0 MENU button 0 DOWN (clockwise) button E4 O0 POWER ON/OFF button Q iPod docking connector VOLUME DOWN button 0 UP (anti-clockwise) button 0 SELECT button GETTING STARTED WARNING: Do not apply power to the unit until all of your connections are made. Please turn off your iPod before docking. Check your iPod manual for the proper procedure to run your model off. This unit operates using an AC-DC power adaptor (included) with 12V DC /1.5A output -@-+ . Before connecting the adaptor, make sure the power ON/OFF switch is set to OFF. 1. Insert the DC plug of the AC-DC power adaptor into the DC 12V jack on the back of the unit. 2. Plug the adaptor into a convenient 120V AC/60Hz wall outlet. BASIC OPERATION Turn on the unit by pressing the Power ON/OFF button either on the main unit or on the remote control. Function modes (iPod/AUX/radio) can be changed by pressing the Function selector on either the main unit or on the remote control. The volume of the unit can be controlled by pressing the volume button either on the main unit or on the remote. iPod CONTROL 4 different adaptors are included for docking your iPod. Select the suitable adaptor and fit it onto the unit. Your iPod can now be inserted into the iPod connector and docked securely. 1. Insert the iPod onto the connector. 2. Turn on the unit and press the function selector to switch to iPod mode. The Power ON/OFF indicator and iPod indicator will light to show the unit is ready to play your iPod. 3. Your iPod can be controlled by the iPod click wheel or using the included Remote control. Please refer to your iPod Instruction Manual for proper operation of your iPod. 4. The volume can be adjusted by pressing the volume up/down buttons on the unit. To remove your iPod, simply stop the playback and gently unplug it from the docking connector. Note: - Your iPod can be charged after it is docked onto the unit. It automatically charges no matter if the main unit is switched On or OFF. - The outputvolume is controlled by the unit setting and not by iPod volume level. REMOTE OPERATION: • PLAY/PAUSE button: Start/pause the music playback. Press and hold to stop your iPod and place it in sleep mode. • REPEAT button: change the playback mode from Normal, Repeat One and Repeat Al I. • SKIP buttons: Press to change to your favorite song. Press and hold to search the desired music period. • MENU button: Press to show the main iPod Menu or to go back one level of your selection. Press and hold to wake your iPod or to return to the top Menu level. • UP/DOWN buttons: To move up or down one level. The same actions as rotating the click wheel of the iPod. • SELECT button: Selects or confirms a menu item on the iPod. Same as the center button on the iPod. Note: - To ensure the Infrared remote control works as expected, your iPod must have the proper or latest iPod software version installed. - The remote control works even when the iPod is locked. - To check your present IPod software version, select Settings > About > Version on your IPod. If an upgrade Is needed, please visit Apple official website for latest updates. E5 LISTENING TO THE FM RADIO 1. Turn on the unit and press the function selector to switch to RADIO mode. The Power ON/OFF indicator and RADIO indicator will light to show the unit is in Radio mode. 2. FM stations can be auto scanned by pressing the Radio scan button. Press the button again to advance to the next station. 3. Once you reach the end of the FM band, press the reset button to restart the scanning from the beginning. Note: To obtain the best FM radio reception, fully extend the FM antenna wire located on the back of the unit. LISTENING TO A NON-DOCKING iPod OR OTHER DIGITAL AUDIO DEVICE If you are using an iPod without a docking port or other MP3/digital audio player, you can still play ¡ton the unit viatheAUXINjack. 1. Turn on the unit and press the function selector to switch to AUX mode. The Power ON/OFF indicator and AUX indicator will light to show the unit is in AUX mode. 2. Plug one end of the 3.5mm audio cable (included) into the headphone or Line out jack on your player. Plug the other end of the cable into the unit AUX IN jack located on the back of the unit. 3. Turn on the player. 4. Use the volume up/down buttons on the unit to adjust the main volume...