Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung COBY electronic, modell 202

Hersteller: COBY electronic
Dateigröße: 988.15 kb
Dateiname: DVD202_MN.pdf

Unterrichtssprache:en

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten

Anleitung Zusammenfassung


Never place batteries close to a heat source such as radiators or heaters. • Dispose of batteries in a responsible manner. Never throw batteries in a fire. • Do not drop or step on the remote control unit. This may damage the parts or lead to malfunction. • Do not mix old and new batteries. • If the remote control unit is not going to be used for long time, always remove the batteries to prevent leakage._ Point the remote control unit no more than 7 meters from the remote control sensor and within 60° from the front of the unit. • The operating distance may vary according to the brightness of the room. Notes: • Do not point bright lights at the remote control sensor. • Do not place objects between the remote control unit and the remote control sensor. • Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment. A B REMOTE CONTROL SIGNAL SENSOR 30 30 B □ tetó EZE CÖBY ] 8 Basic operation Preparations • Switch ON the TV and select '‘Video" as the input source. • Switch on the stereo system if the player has been connected to a stereo audio amplifier. 1 Press POWER on the main unit to turn the power on 2. Press the OPEN/CLOSE by the main unit or remote control unit to open the disc tray. Open 3. Place a disc onto the disc tray. Hold the disc without touching either of Its surfaces, position it with the printed side facing up, align it with the guides and place it on the disc tray. (1) 8cm disc (2) 12cm disc 4. Press the OPEN/CLOSE button again or PLAY on the main unit or remote control .The tray will close and display the following: Close DISC Loading The player will automatically play. When a menu screen appears on the TV monitor:- In case of Interactive DVDs with playback control, a menu screen appears on the TV. With DVDs, you can use CURSOR to select which item you want to enjoy and press ENTER. • Press POWER button on the front panel or remote control to switch the unit from ON to STANDBY mode (or vice versa). In standby mode, the unit is still consuming a small amount of power. Note: • The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item. When no further selections are to be played, be sure to press the STOP button to clear the menu display. • If the disc is placed in the tray upside down (and it Is a single sided disc), the DVD display will indicate "NO DISC”. For your reference: When 0 appears while a button is being operated, it means that the corresponding operation is prohibited by the player or the disc. 1 oyp CÖBY 9 Stopping play Press STOP For you convenience: Memory Stop. DVDs can utilize a function called Memory Stop. This allows you to temporarily stop a movie and restart it from the same point later. While playing a disc, pressing STOP once will set the player into Memory Stop mode. At this point, pressing PLAY re-starts the movie from the same point. Pressing STOP a second time will stop the disc completely (i.e. the Stop Memory is lost). Note that some DVD discs will not allow the use of Memory Stop. Skipping + or - [Skipping ■ Press SKIP+ during play. A chapter (DVD) or a track (CD) is skipped each time the button is pressed. [Skipping -| Press skip- during play. The chapter/track will be skipped to previous chapter/track by press "skip-" button each time. A-B HPT SHUFFLE PROGRAM CLEAR GOTO KO_D^VK dcci TV SLOW STEP P;'N ZOOM SETUP AUDIO SUB-T ANGLE MENU TITLE A < entEr> ► Fast FWD/RWD Using either the Remote Control or the Front Panel controls, press FAST FWD(^^)or FAST RWD(-<^ (during play. STOP FAST FORWARDS FAST BACKWARDS For you reference: Press FAST FWD or FAST RWD button once, the disc will be played forward or backward at double (X2) speed. With each subsequent press, the disc will be played back at x2,x4, x8 or <20 speed and PLAY Press PLAY button to return to normal play. 10 Pause/Step picture Press PAUSE/STEP during play For your reference: 1. During play, pressing the PAUSE button will suspend playback. Press PAUSE again (or press the ENTER/PLAY button) return to normal play. 2. Repeatedly Press the STEP button. The picture advances forward frame-by-frame for each subsequent press of STEP To return to normal play, press the ENTER/PLAY button. PAUSE II STEP II ► SLOW PLAY(DVDs only) Press SLOW button when playing, you can play the disc at 1/2, 1/4. 1/6, 1/8 of normal speed. If you want stop it, you can press PLAY button to play normally again. MENU and TITLE Press MENU or TITLE by the remote control unit • DVD discs usually are divided into several titles and subdivided into chapters. CD discs are divided into tracks. • Press TITLE on the remote and the disc playing will automatically return to the title program. Press the CURSOR buttons on the remote to select the option, then press ENTER button to play it. Note it is possible that some DVD discs will not have this function. ...

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien