Low sulfur fuels reduce particulate and oxides of nitrogen emissions as well. The Oilheat Manufacturers' Association recommends these fuels as the preferred fuels for this burner. • State and local approvals are shown on burner rating label (see below). • All oil burners should be installed in accordance with regulations of the latest revision of the National Fire Protection Association Standard NFPA 31 and in complete accordance with all local codes and authorities having jurisdiction. Regulati

3 Be aware of hazard definitions ........................................................................... 3 Check certifications/approvals ........................................................................... 3 Notice special requirements................................................................................ 3 Prepare burner & site Inspect/prepare installation site .......................................................................... 4 Prepare burner ......................

Disconnect power before servicing. Text Box: Electrical shock hazard. Disconnect power before servicing. Text Box: SK9437 Text Box: SK9359 Text Box: DANGER Startup burner/set combustion Do not attempt to start the burner when excess fuel or vapor has accumulated in the appliance. Starting the burner under these conditions could result in a puffback of hot combustion gases, high smoke levels, or otherwise hazardous operation. 1. Open the shutoff valves in the oil supply line to the burner. 2. Ope

Open Burner Range Standard Features & Accessories All models include • Large, self-cleaning convection oven (see indiv. models for dimensions) o Eight functions: two-element bake, convection bake, Mini-Broil, Maxi- Broil, convection broil, TruConvec™ convection cooking (element around fan), convection dehydrate, and convection defrost o Three heavy-duty racks/six rack positions o Two lights • Exclusive VariSimmer™ setting for all burners • Removable porcelain burner bowls • Drip tray with rolle

Sealed Burner Rangetop Standard Features & Accessories All models include • Exclusive VSH™ Pro Sealed Burner • Brass sealed burners with 6Q model includes System (VariSimmer™ to High)— porcelain/cast iron caps and automatic • Six 15,000 BTU burners combination of patented burner and ignition/re-ignition • 12”W. grill with flavor generator plates top design provide ease of cleaning • Drip tray with roller bearing glides and and automatic ignition/re-ignition plus superior performance at simmer tw

Protect Against Dust and Moisture .. Dust and Moisture 8 6104 BCF5 R07 50001 End view Side view 3/16” - 7/32” gap 1/4” in front of nozzle 3/16” above nozzle center R P Q Install nozzle line assembly Insert the nozzle line assembly into the burner air tube. Reference Figure 6. Slide the secondary adjusting plate (Figure 7, item f) completely to the left on the indicator adjusting plate (item e). Finger tighten acorn nut (item c) to secure the two plates together. Slide both plates completely to t

To the Homeowner or Equipment Owner:To the Professional, Qualified Installer or • Please read and carefully follow all instructions Service Agency: provided in this manual regarding your responsi-• Please read and carefully follow all instructionsbilities in caring for your heating equipment. provided in this manual before installing, starting, • Contact a professional, qualified service agency or servicing this burner or heating system. for installation, start-up or service work. • The Installa

• Never use Teflon tape on fuel oil fittings. • Tape fragments can lodge in fuel line components and fuel unit, damaging the equipment and preventing proper operation. • Use oil-resistant pipe sealant compounds. Fuel line valve and filter – • Install two high quality fusible-handle design shutoff valves in accessible locations on the oil supply line to comply with the NFPA 31 Standard. Locate one close to the tank and the other close to the burner, upstream of the filter. • Install a generous ca

These advanced components are available on our B2000 series chassis. The 240 volt AFG’s performance-enhancing features will help you meet today’s toughest heating system and pressure washer challenges. Product Sheet Outputs: .Motor: 208/240 Vac, 5 full load amps (FLA), 30 locked rotor amps (LRA) .Igniter: 208-240 Vac, 3 A @ 0.7 PF min .Solenoid Valve: 208-240 Vac, 1 A @ 0.7 PF min .Thermostat Anticipator Current: 0.1 A (if applicable) .Thermostat Voltage: 24 Vac (if applicable) Electrical Rating

Omitting the baffle can result in unacceptable burner combustion. . Inspect all gaskets. Replace any that are damaged or would fail to seal adequately. . Clean the blower wheel, air inlet, air guide, retention head and static plate of any lint or foreign material. . If motor is not permanently lubricated, oil motor with a few drops of SAE 20 nondetergent oil at each oil hole. DO NOT over oil motor. Excessive oiling can cause motor failure. . Check motor current. The Amp draw should not exceed th