Stimmen - 4, Durchschnittliche Bewertung: 4.8 ( )

Hersteller: Caldera Dateigröße: 271.01 kb Dateiname: Unterrichtssprache:

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS: Do not try to light any appliance. Do not touch any electrical switch. Do not use any phone in your building. Immediately call your gas supplier from a neighbor’s home. Follow your gas supplier’s instructions. If you cannot reach your gas supplier call the fire department. INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER, SERVICE AGENCY OR THE GAS SUPPLIER. Installer: Please leave these instructions with the consumer for future reference. Phone 800-725-7711 Fax 800-962-3072 CONGRATULATIONS The Caldera® “Touch™” Series touch control gastops have been engineered to be simple to use while providing many extra features that benefit your cooking and your cooking experience. We hope you enjoy your purchase REGISTRATION We encourage you to register your gastop so you may take advantage of our full two year warranty and limited five year warranty should the need ever arise. Registration may be done on our website at by returning the enclosed postcard or by faxing us toll free at 800-962-3072. For your convenience, the model number, serial number, and manufacturers numbers are below. Phone 800-725-7711 Fax 800-962-3072 2 Table of Contents Page 4-7 Safety Precautions Page 8-10: Operating Instructions Page 11: Warranty and Service Information Phone 800-725-7711 Fax 800-962-3072 3 IMPORTANT! Read all instructions before using your gastop unit. If you have questions please call us at 800-725-7711 between 9am and 5pm EST. Electrical Requirements Your gastop must be connected to a properly grounded 120 volt AC 60 Hz, 15 amp electrical service and installed by a qualified installer. It is the personal responsibility and obligation of the customer to contact a qualified electrician/installer and have the unit connected to a properly grounded circuit in accordance with local codes of your area or, if no codes apply, the National Electric Code, ANSI/NFPA 70-Latest Edition must be followed. Copies are available by writing:: National Fire Protection Association Battery March Park Quincy MA 02269 In Canada follow CAN/CSA-C.22.1, Canadian Electrical Code, Part 1. Copies are available by writing:: CSA 178 Rexdale Boulevard Toronto, Ontario, CANADA, M9W 1R3 Important Safety Instructions As with all appliances there are certain rules to follow for safe operation. Make sure everyone who operates this gastop is familiar with the operation and with the following precautions. It is the personal responsibility and obligation of the customer to contract a qualified installer and have the unit connected properly in accordance with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1 - Latest Edition and CAN/CSA-B149.1 Natural Gas and Propane Installation Code. The gastop must be connected to the proper gas supply and checked for leaks. Using Gas Safely Gas fuels and their uses can cause minor exposure to benzene, formaldehyde, carbon monoxide and soot, primarily from incomplete combustion. Significant exposure to these substances can cause cancer or reproductive harm. Properly adjusted burners with a blue, rather than yellow, flame will minimize the incomplete combustion. Venting with a hood, or open window will further minimize exposure. .. The maximum gas supply pressure may not exceed 14-inches W.C.P. (1/2 PSI) .. Never use a match or other flame to locate a gas leak. Explosion fire or injury could result. .. Know where your main gas shut off valve is located. Phone 800-725-7711 Fax 800-962-3072 4 Before Using Your Gastop: READ THIS MANUAL 1. Insure proper installation and servicing. Have the gastop installed by a qualified technician. Installation must conform to local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 and CAN/CSA-B149.1 Natural Gas and Propane Installation Code. 2. The gastop you have purchased uses either LP or natural gas. It cannot be converted from one to the other. The proper fuel must be used. 3. Use only a 120 volt grounded outlet. Installation must conform to local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70 and CAN/CSA-C22.1 Canadian Electrical Code, Part . All gastops must be grounded for the controls to function pro...

Herunterladen

Geben Sie zwei Ziffern: