Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: CycleOps Dateigröße: 7.2 mb Dateiname: 545c98c7-e6cd-41fd-a413-180f2d0da917.pdf Unterrichtssprache:

Unpac king the Cycle Ops pro se ries indoo r Cycle ............2 3. In doo r cycle Asse mbl y....................................................................3 Attach Stabilizer Feet Attach Handlebar Attach Seat Level the Indoor Cycle Attach Pedals 4. GENERAL USE............................................................................................6 Adjust Seat Adjust Handlebar Adjust Resistance 5. COMM ON ADJUSTMENTS.....................................................................8 R eplace Speed Sensor Battery R eplace Cadence Sensor Battery R eplace Hub Batteries Adjust Flywheel/Chain Tension Adjust Brake Pad 6. Preventat ive Ma intenance .........................................................10 7. eLECTRONICS.........................................................................................11 8. Ra dio Frequenc y (RF) INTERFERENCE........................................12 9. Important precaut ions ................................................................12 10. WARR ANTY............................................................................................13 CHAPTER 1: before beginning Congratulations on choosing the CycleOps Pro Series indoor cycle! The CycleOps Pro Series indoor cycle takes cycling to the next level as the only indoor cycle to fit, feel and ride like an outdoor bike. CycleOps Pro Series Indoor Cycle User Guide for: -400 Pro -300 Pro -200 Pro -100 Pro Read this guide to learn how to: -Assemble the indoor cycle -Use the indoor cycle -Make common adjustments Visit to learn more about Saris Cycling Group and the CycleOps Pro Series indoor cycle: -Register product for warranty -View frequently asked questions -View instructional videos -View product and technical updates from CycleOps -Sign up for CycleOps Power newsletter -Learn more about training with power 2 CHAPTER 2: Unpac king the CycleOp s Pro ser ies Indoor Cycle Place the box upright and cut the plastic binding straps. Lift the top of the box to expose the indoor cycle and packaging. Remove all parts from the box including foam inserts. Ensure all the following parts are included: Name Quantity A Rear stabilizer 1 B Front stabilizer 1 C Main frame assembly 1 D Handlebar post (shorter, reads to 18”) 1 E Seat post (longer, reads to 23”) 1 F Seat 1 G Seat post clamp 1 H Handlebar 1 I Water bottle holder 1 J End caps 2 K End cap screws 4 L Water bottle spacer 1 M Large L handles 2 N Small L handles 2 O Stabilizer bolts 8 P Stabilizer washers 8 Q Multi-purpose wrench 1 R 6mm Allen wrench w/Phillips screwdriver end 1 S 5mm Allen wrench 1 T 4mm Allen wrench 1 U 3mm Allen wrench 1 A B C D E F G H I L Additional tools that may be helpful: -Vice Grips or small clamping tool -17mm Cone wrench -15mm box wrench -10mm box wrench -Pliers -Pedal wrench -2.5mm Allen wrench Rear stabilizer Front stabilizer Main frame assembly Seat post Seat post clamp Water bottle holder Handlebar Seat Water bottle spacer Handlebar post Large L Handles Small L Handles 18” 23” N Stabilizer bolts O Stabilizer washers P Q S Multi-purpose wrench T U End caps J K End cap screws R M 5mm Allen wrench 3mm Allen wrench 4mm Allen wrench 6mm Allen wrench w/ Phillips screwdriver end 3 A B 1. Note the difference between the front and rear stabilizers. The larger stabilizer with wheels goes in the rear of the indoor cycle (under the fl ywheel). 3. Attach the front stabilizer to the front of the main frame with four 5mm stabilizer bolts and stabilizer washers using the 5mm Allen wrench. Tighten the inner bolts fi rst, and then proceed to the outer bolts to ensure the foot is secured properly and evenly. CHAPTER 3: indooR CyClE AssEmbly Attach Stabilizer Feet 1. Remove 6mm bolt in main frame assembly using 6mm Allen wrench. The 6mm bolt can be kept in place of the large L handle for a more permanent placement of the handlebar height. 2. Insert the handlebar post into the head tube and secure it by inserting the large L handle into the main frame assembly on the right side of the indoor cycle (chain guard side). D Attach handlebar A 2. Attach the rear stabilizer to the rear of the main frame with four 5mm stabilizer bolts and stabilizer washers using the 5mm Allen wrench. Tighten the inner bolts fi rst, and then proceed to the outer bolts to ensure the foot is secured properly and evenly. Handlebar post Rear stabilizer Front stabilizer M Large L handle C Main frame assembly Rear stabilizer A Front stabilizer B 3. Slide the water bottle holder and water bottle spacer onto the road style handlebar. Water bottle holder Handlebar Water bottle spacer Water bottle holder Handlebar 4. Secure the water bottle holder and handlebar together using the previously removed, two 4mm spacer bolts and washers, on the underside of the handlebar. Water bottle spacer 5. Carefully slide the road style handlebar assembly onto the handlebar post. Secure the plastic end cap to the handlebar post using two end cap screws with the Phillips screwdriver side of...

Herunterladen

Geben Sie zwei Ziffern: