Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Turn unit ON until water flows from the handle, turn unit OFF. Select and Insert Tip: [4 Press tip firmly into handle. When tip is properly inserted there should be no gap between control knob and handle. Adjust Pressure and Pause Control: For first time users, adjust pressure control to lowest position. Gradually increase pressure as you prefer. You can temporarily stop water flow by pressing the pause button on the handle. continued on back Using your Waterpik® Water Flosser: Always place tip in mouth before turning unit on. I Lean over sink and close lips enough to prevent splashing, while still allowing water to flow from mouth into the sink. Turn unit ON. . Aim the tip just above the gumline at a 90 degree angle. [6 Tip Removal: Push the tip eject button on the p handle. The control knob will rise, releasing the tip. Remove the tip. Caution: Do not press tip eject | button while unit is running. u £.|l T* CÛ ¿00000 Starting with the back teeth, follow the gumline and pause briefly between teeth. Continue until all areas around and between teeth have been cleaned. REGISTER YOUR PRODUCT ONLINE NOW! Receive up to $44 in savings. 7 Water Pik, Inc. 1.800.525.2774 • 1730 East Prospect Road, Fort Collins, CO 80553-0001 USA ©2009 Water Pik, Inc. 20012848-F AA...