Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Samsung Dateigröße: 674.72 kb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Festplatten - MZ-7PC128B (673.02 kb)

Festplatten - MZ-7PC128B (88.6 mb)

Festplatten - MZ-7PC128B (671.7 kb)

Festplatten - MZ-7PC128B (1.4 mb)

5 Carefully insert the SSD into the bay and close the HDD cover. NOTE: If needed, place the mounting spacer into the bay for tight fit. 6 Reinstall the battery. Samsung Solid State Drive Desktop PC 1 Turn OFF the desktop PC power and disconnect the power cable. 2 Remove the desktop PC cover. 3 If you are adding the SSD as an additional storage device, mount it in a 2.5” HDD bay. Next, connect the SATA cable and power cable to the SSD. If your PC is only equipped with 3.5” HDD bays, attach the SSD to a 2.5” to 3.5” adapter bracket before mounting it in an empty HDD bay or slot. 4 If you are replacing an existing HDD with the SSD, disconnect all cables connected to the HDD and then remove the HDD from the bay. Attach the SSD in a 2.5” to 3.5 bracket and mount the bracket in an empty HDD bay. Finally, properly connect the SATA cable and power cable. NOTE: Desktop PCs have multiple SATA ports, depending on the PC chipset and motherboard model. Samsung recommends that the SSD be connected to the lowest numbered SATA 6Gb/s port. Although the 830 Series SSD is compatible with both the SATA 3Gb/s and 6Gb/s ports, for maximum performance the product must be connected to a SATA 6Gb/s port. Most Desktop PCs have 4~6 SATA ports, and each SATA port is numbered on the motherboard. If SATA port numbers are not shown on the motherboard or you are not sure about port numbers, then you can simply install the SSD on any available port. Usually SATA 6Gb/s ports are indicated by blue colors to distinguish itself. For more information please refer to your PC or motherboard user manuals. 5 Close the desktop PC cover and reconnect the PC power cable. Samsung Solid State Drive 6. BIOS Configuration NOTE: Mac users can skip this section. In most cases, the system will automatically detect the newly installed SSD when you restart the PC. If not, please follow the procedure below or refer to the user manual of your PC. 1 Turn the PC power ON. 2 Press the special key for your system to get into the PC BIOS settings (also called CMOS) during the initial boot process. 3 After entering the PC BIOS, make sure that your PC BIOS recognizes your Samsung SSD 830 series and that the operation mode is set to either [AHCI] or [RAID] (depending on how you want to configure your system). 4 Save the changes you made to the BIOS settings and reboot the PC. NOTE: The way to get into the BIOS and the settings menu itself differs between PC manufacturers In most cases, the key is the F2 or Delete key. Some PC manufacturers have the BIOS optimized exclusively for their PCs and may provide only limited settings and options. Some PC chipsets do not support [AHCI] operation mode even if they support the SATA interface. Refer to your PC’s user manual for more information. For users who are completing a data migration with Norton Ghost: You may stop here. Your computer should boot into Windows as normal. For users who are doing a clean OS install: If the BIOS detects the SSD and a booting error mes...

Herunterladen

Geben Sie zwei Ziffern: