Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTIONS: • If used near a radio, this unit may interfere with reception. • Prevent inflammables, water and metallic objects from entering the unit. • Do not disassemble or modify the unit. • Do not apply shocks to the unit. • Do not subject the unit to direct sunlight. • Avoid using the unit in extremely hot or humid places. • Avoid using the unit in places subject to vibrations. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. EN-2 A WORD ON PACKS The battery packs Give attention to their characteristics. For charging : 10°C to 35°C (50°F to 95°F) For operating : 0°C to 40°C (32°F to 104°F) For storing : –10°C to 30°C (14°F to 86°F) NOTE: The rating plate (Serial number plate) bottom of the unit. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. USING HOUSEHOLD AC PLUG ADAPTER In case of connecting attached Power Cord Plug AC wall outlet other than American National Standard C73 series type, use an AC plug adapter, so called “Siemens Plug”, as shown below. For this AC plug adapter, consult your nearest Plug adapter (optional) JVC dealer. INFORMATION This device complies Operation is subject (1) This device may not interference, and (2) this interference received, including cause undesired operation. Change or modifications not approved responsible for compliance could authority to operate the equipment. been tested and found to comply with Class B digital device, pursuant to Part 15 Rules. These limits are designed to provide protection against harmful interference in a residential installation. This equipment generates, uses, and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. EN-3 CHARGING PACK CHARGING PACK To AC outlet POWER indicator CHARGE indicator Battery pack BN-V207U or BN-DC OUT connector AC Power Adapter/Charger AA-V20U EN-4 1 11 Make sure DC cord from the AC Power Adapter/Charger. Plug the AC Adapter/Charger’s power cord into AC outlet. The POWER 2 2 Remove the battery pack’s protective cap. Attach the battery pack with pointing toward the indicator pack mount on the AC Power Adapter/Charger. The CHARGE Indicator begins blinking indicate charging has started. 3 3 When the CHARGE indicator stops blinking stays lit, charging is finished. 4 4 Slide the battery in the opposite direction of the arrow and lift off. Remember to unplug the AC Adapter/Charger’s power cord from the AC outlet. NOTE: Perform charging where the temperature is between 10°C (50°F) and 35°C (95°F). 20°C (68°F) to 25°C (77°F) is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete. Battery pack Charging time BN-V207U approx. 1 hr. 30 min.* BN-V214U approx. 3 hrs.* * When charged at temperatures between 20°C (68°F) and 25°C (77°F). • When charging Battery Packs after a long storage period, charging time will be longer than the time indicated above. EN-5 SUPPLYING POWER SUPPLYING POWER You can connect the AC outlet using the AA-V20U AC Power Adapter/Charger. To DC OUT connector To AC outlet AC Power Adapter/Charger AA-V20U DC cord To DC IN connector Core filter 1 1 Plug the AC Adapter/Charger’ s power cord into an AC outlet. 2 2 Connect the AC Adapter to the camcorder. NOTE: When using the provided DC cord, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves performance of equipment. EN-6 DURING SPECIFICATIONS DURING SPECIFICATIONS c The AC Power Adapter/Charger AA-V20U is specifically designed BN-V207U and/BN-V214U Battery Packs. c When charging a brand new Battery that’s been in storage for an extended Charging Indicator may not come remove the Battery Pack, then reattach charging again. c If you connect the DC Cord to the DC while a Battery Pack is being charged, power will be supplied to the camcorder and charging will end incomplete. c Vibration noise can sometimes be heard coming from the inside of the AC Power Adapter/Charger. This is normal. c The AC Power Adapter/Charger p...