– (Corporate Headquarters) Connect to localized APC Web sites for specific countries, each of which provides customer support information. – Global support searching APC Knowledge Base and using e-support. • Contact an APC Customer Support center by telephone or e-mail. – Regional centers: Direct InfraStruXure Customer Support Line (1)(877)537-0607 (toll free) APC headquarters U.S., Canada (1)(800)800-4272 (toll free) Latin America (1)(401)789-5735 (USA) Europe, Middle East, Africa (353)(91)7020

All water and electrical connections must be performed by a qualified contractor in accordance with local and national codes. Warning Model Cross Reference Information APC MODEL NUMBER CARRIER MODEL NUMBER ACCH050 30RAN015 ACCH084 30RAN025 ACCH120 30RAN035 ACCH167 30RAN050 Typical Piping — Chiller to Cooling Distribution Unit (CDU) CHILLER CDU RC Components inside dashed lines are included with the chiller, InfraStruXure InRow RC, and CDU. All other items (valves, piping, etc.) are customer-supp

Warning Model Cross Reference Information APC MODEL NUMBER CARRIER MODEL NUMBER ACCH050 30RAN015 ACCH084 30RAN025 ACCH120 30RAN035 ACCH167 30RAN050 Typical Piping — Chiller to Cooling Distribution Unit (CDU) CHILLER CDU RC Components inside dashed lines are included with the chiller, InfraStruXure InRow RC, and CDU. All other items (valves, piping, etc.) are customer-supplied. Note . Pressure reducing/fill valve . Pressure gauges/petcocks . Air separator and vent* . Heat exchanger . Flex connect

Supplemental Installation Information for APC Chillers Dual Power Feature (Optional) The optional dual power feature provides a separate power connection point for the pumps and controls. If the circuit is connected to an Uninterruptible Power Supply (UPS), the power connection keeps the pumps running to recirculate cooling water in the event of a power failure. Upon loss of power, all compressors and fans shut down. At the same time, the dual-power relay closes, putting the unit in heat mode, a

If the circuit is connected to an Uninterruptible Power Supply (UPS), the power connection keeps the pumps running to recirculate cooling water in the event of a power failure. Upon loss of power, all compressors and fans shut down. At the same time, the dual-power relay closes, putting the unit in heat mode, allowing the controller to keep the pumps running and also removes any call for cooling. On power restoration, the dual power relay opens. The unit returns to cooling mode and stages up com

Warning Model Cross Reference Information APC MODEL NUMBER CARRIER MODEL NUMBER ACCH050 30RAN015 ACCH084 30RAN025 ACCH120 30RAN035 ACCH167 30RAN050 Typical Piping — Chiller to Cooling Distribution Unit (CDU) CHILLER CDU RC Components inside dashed lines are included with the chiller, InfraStruXure InRow RC, and CDU. All other items (valves, piping, etc.) are customer-supplied. Note . Pressure reducing/fill valve . Pressure gauges/petcocks . Air separator and vent* . Heat exchanger . Flex connect

Contact the APC representative or other distributor from whom you purchased your APC product for information on how to obtain local customer support. Entire contents copyright 2006 American Power Conversion Corporation. All rights reserved. Reproduction in whole or in part without permission is prohibited. APC, the APC logo, and InfraStruXure are trademarks of American Power Conversion Corporation. All other trademarks, product names, and corporate names are the property of their respective owne

– (Corporate Headquarters) Connect to localized APC Web sites for specific countries, each of which provides customer support information. – Global support searching APC Knowledge Base and using e-support. • Contact an APC Customer Support center by telephone or e-mail. – Regional centers: Direct InfraStruXure Customer Support Line (1)(877)537-0607 (toll free) APC headquarters U.S., Canada (1)(800)800-4272 (toll free) Latin America (1)(401)789-5735 (USA) Europe, Middle East, Africa (353)(91)7020