Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
During transportation the oil in the compressor may have flowed into the refrigeration system. Before switching on the appliance for the first time, clean the interior of the appliance ( see chapter “ Cleaning the appliance”) . Electrical connection The socket must be near the appliance and also freely accessible following installation of the appliance. The appliance complies with the protection class I. Connect the appliance to 220–240 V/50 Hz alternating current via a correctly installed socket with protective conductor. The socket must be fused with a 10 to 16 A fuse. For appliances operated in non- European countries, check whether the stated voltage and current type match the values of your mains supply match the values of the mains supply. This information can be found on the rating plate. Fig. * en a= Warning Never connect the appliance to electronic energy saver plugs. Our appliances can be used with mains and sine-controlled inverters. Mains- controlled inverters are used for photovoltaic systems which are connected directly to the national grid. Sine-controlled inverters must be used for isolated applications ( e.g. on ships or in mountain lodges) which are not connected directly to the national grid. Getting to know your appliance Please fold out the illustrated last page. These operating instructions refer to several models. The features of the models may vary. The diagrams may differ. Fig. 1 * Not all models. 1 Light switch 2 Main On/Off switch 3 Controls/light 4 Glass shelf 5 Vegetable container 6 Frozen food container 7 Shelf for tubes and small tins 8 Egg rack 9 Shelf for large bottles A Refrigerator compartment B Freezer compartment en Controls Fig. 2 1 Main On/Off switch Serves to switch the whole appliance on and off. 2 Temperature selection button Press this button to set the temperature. 3 Temperature display refrigerator compartment The numbers next to the temperature display lights correspond to refrigerator compartment temperatures in °C. The lit lamp indicates the selected temperature. 4 “super” button For switching on the Super cooling ( refrigerator compartment) function or Super freezing ( freezer compartment) function. See chapter entitled “ Super cooling” or “ Super freezing” . Switching the appliance on Switch on the appliance with the main On/Off switch. Fig. 2/ 1 The temperature display, Fig. 2/3, flashes until the appliance has reached the set temperature. The appliance starts to cool, the light is switched on when the door is open. When the appliance has been switched on, it may take several hours until the set temperature has been reached. Do not put any food in the appliance beforehand. Operating tips The refrigerator compartment temperature rises: ¦ if the appliance door is opened frequently, ¦ if large quantities of food are placed in the refrigerator compartment, ¦ if the ambient temperature is high. Setting the temperature Fig. 2 Refrigerator compartment The temperature can be set from +2 °C to + 8 °C. Keep pressing temperature selection button 2 until the required refrigerator compartment temperature is set. The value last selected is stored. The set temperature is indicated on display 3. We recommend a factory setting of + 4 ° C in the refrigerator compartment. Perishable food should not be stored above + 4 °C. Freezer compartment The temperature in the freezer compartment depends on the temperature in the refrigerator compartment. Lower temperatures in the refrigerator compartment also cause lower temperatures in the freezer compartment. en Usable capacity Information on the usable capacity can be found inside your appliance on the rating plate. Fig. * Fully utilising the freezing capacity The maximum amount of food can be placed in the freezer by removing all fittings. The food can be stacked directly on the shelves and in the bottom of the freezer compartment. Removing the fittings Pull out the frozen food container all the way, lift at the front and remove. Fig. 3 Refrigerator compartment The refrigerator compartment is the ideal storage location for ready meals, cakes and pastries, preserved food, condensed milk, hard cheese, fruit and vegetables sensitive to cold as well as tropical fruit. Note when loading products: Wrap or cover food before placing in the appliance. This will retain the aroma, colour and freshness of the food. In addition, flavours will not be transferred between foods and the plastic parts will not become discoloured. Note Avoid contact between food and rear panel. Otherwise the air circulation will be impaired. Food or packaging could freeze to the rear panel. Note the chill zones in the refrigerator compartment! The air circulation in the refrigerator compartment creates different chill zones: ¦ Coldest zone is between the arrow stamped on the side and the glass shelf situated below. Fig. 4 Note Store perishable food ( e.g. fish, sausage, meat) in the coldest zones. ¦ Warmest zone is at the very top of the door. Note Store e.g. cheese an...
Dieses Handbuch ist für folgende Modelle:Kühlen - 3KIB4851/02 (564.87 kb)
Kühlen - 3KIB4860/01 (564.87 kb)
Kühlen - 3KIB4860/02 (564.87 kb)