Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Bosch Dateigröße: 2.13 mb Dateiname: Unterrichtssprache:

Containers or storage areas wobble or stick Please check the removable parts and re- insert them correctly if required. Bottles or receptacles are touching each other Move the bottles or receptacles slightly away from each other. en Eliminating minor faults yourself Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. Customer service will charge you for advice – even if the appliance is still under guarantee! Fault Possible cause Temperature differs greatly from the set value. Remedial action In some cases it is adequate to switch off the appliance for 5 minutes. If the temperature is too high wait a few hours and check whether the temperature has approached the set value. If the temperature is too low check the temperature again the next day. Displays do not illuminate. Power failhas been the mains has not bproperly. ure; the fuse switched off; plug een inserted Connect mains plug. Check whether the power is on, check the fuses. Temperature display indicates “ E..” . Electronics have detected a fault. Call customer service. Warning signal sounds, alarm button lights up. Fig. 2/5 The freezer compartment is too warm! ApplianceVentilation openings have been covered. The frozen food is at risk of thawing! Too much placed in compartmTo switch off the warning signal, press the alarm button 5. is open. Close the appliance. Ensure that there is adequate ventilation. food was the freezer ent at once. Do not exceed max. freezing capacity. When the fault has been eliminated, the alarm display goes out shortly afterwards. en Fault Possible cause Remedial action Freezer compartment temperature display flashes. Fig. 2/4 Warning signal sounds The Alarm button is lit. Fig. 2/5 The freezer compartment is too warm! To switch off the warning signal, press the Alarm button 5. Appliance is open. Close the appliance. Ventilation openings have been covered. Ensure that there is adequate ventilation. Too much food was placed in the freezer compartment at once. Do not exceed max. freezing capacity. The frozen food When the fault has been eliminated, is at risk of thawing! the Alarm display goes out shortly afterwards. Freezer compartment Afault caused temperature display the freezer flashes. Fig. 2/4 compartment to become too warm in the past. When the alarm button 5 is pressed, the temperature display stops flashing. Fig. 2/4 The temperature display indicates for 5 seconds the warmest temperature which was reached in the freezer compartment. Appliance is not Showroom mode is Hold down alarm button 2/5 for cooling, temperature switched on. 10 seconds until display and light an acknowledgement signal sounds. are lit. After a short time check whether your appliance is cooling. Appliance self-test Your appliance features an automatic self-test program which shows you sources of faults which may be re...

Herunterladen

Geben Sie zwei Ziffern: