Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: LG Dateigröße: 2.86 mb Dateiname: Unterrichtssprache:

How to separate the vegetable drawer Remove the lower basket from the door by lifting it up. Pull the drawer until it stops and slightly lifting it up pull it to take it out. Operation ENGLISH How to separate the vegetable drawer or opti-zone drawer (Optional) For Rail Model When separating the vegetable and opti-zone drawer, pull the vegetable toward you and then lift the drawer up with both hands. Door Alarm • When the door of the fridge is opened for a while, the alarm sounds. Please contact with the local service center if warning continue to sound even after closing the door. • You can choice door alarm on/off pressing door alarm button shortly. On Off On 2323 Operation (1) (2) • Take out the twist ice maker, fill it up and put it back to it’s original location. Ice Making Note • Rotating the ice separation handle before ice is fully frozen may cause the remaining water drop into the ice storage bin to lump the ice together. • Take the ice out of the ice storage bin for use but do not pour water into the ice storage bin to freeze the water to ice. The ice storage bin can be Frozen and broken. • When the ice is full, it is designed for the ice to fall to the bottom in case the ice storage bin can not pulled out. Be careful not to store the ice too full. • Ice will be dropped into the ice storage bin by rotating Ice separation handle of ice making compartment. • You can make ice and also use this space as a storage space for Frozen food. Removing (1) (Twist ice maker) as shown in the picture. • Defrosting takes place automatically. • The defrosting water flows down to the evaporating tray and is evaporated automatically. Defrosting • Take out container with ice tray. Fill the ice tray to the water level and put it back. • You can place container with ice tray in upper or middle drawer of freezing compartment. • If ice cubes are required fast, press the «EXPRESS FRZ.» button. • To remove ice cubes, hold the tray at its ends and twist gently. Ice Making NToItPe To remove ice cubes easily, run water on the tray before twisting. 24 Operation Operation ENGLISH Water Dispenser (Optional) Features Dispenser Pad Knob Cap Assembly (Open/Close) Tank Cap Tank Clamp Water Tank Filling of WATER TANK 1. Turn the knob shutter to open. And pull out the water tank assembly. After unlocking the clamp, open the cap tank and then fill water using a kettle etc. 2. After filling potable water, fix the cap cover and then lock the clamp. 3. When long period does not use or the first use, You have to fill the water tank with over 3.2 L water. Water Dispenser (Optional) Dispenser Pad Cap Cover Water Tank Filling of WATER TANK How to Remove the Water Tank • The assembly is the reverse of removal. • Be careful not to press on with valve. • When you assemble water tank on the door, be careful to install certainly. 1. Pull out the water tank. Then open the cap cover. 2. Water can be filled up to 2.3 liter. 3. After filling potable water. Close the Cap Cover. 1825 Operation Operation Filling of PET Bottle (Optional) When using the water bottle, you can connect the cap assembly tank to the general water bottle to use the water bottle, instead of the water tank provided. 1. Turn the cap assembly tank in open direction to separate from cap tank. Open the water bottle and insert the tube into the water bottle. 2. Assembly water bottle by the cap assembly tank (Height of water bottle_ Below 350 mm, Beyond 300 mm). Please relocate the tilting basket. There are some types that are not compatible. 3. Assembly the water bottle on the door. Close Close Open w ww CAUTION • Please use bottled water currently circulated. -If you fill soft drinks, milk and fruit juices or ground water(included Ca, Mg, Si etc..) or no filtered water, it may cause malfunctioning. • When you fill water tank with water, please let hot water cool before putting water tank in refrigerator. -Hot water cause malfunctioning. • When you install water tank in refrigerator, cap should fit into (plug) housing and safety knob has to be pointed to “close”. -When water tank is not correctly inserted, dispenser might not work or water tank might fall off on the floor. Close Open • If you want to take out water tank for re- dispensing or cleaning, you should grab and pull the upper part of the water tank and have safety knob pointed to “open”. Drinking 1. Press the dispenser pad with a cup. 2. If pressing the pad, water inside of the dispenser is supplied. 3. If slowly removing a cup from the pad, water will not fall down. 4. Some noise after dispensing is the sound to absorb water remained in the tube, which is for the purpose of sanitation. w ww CAUTION Do not use other beverage (milk, juice, carbonated beverage etc) than potable water. Especially beverage including grain must not be used (may result in failure). w ww WARNING Fill with the potable water only. Pump can generate some noise, while the cool water is taken from the tank (e.g. Bottle, water tank). 26 OperatioOperation R...

Herunterladen

Geben Sie zwei Ziffern: