Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: LG Dateigröße: 23.15 mb Dateiname: Unterrichtssprache:

• Door may have been left ajar or package holding door open. • Too frequent or too long door openings. • Frost within package is normal. • This phenomenon is likely to occur in a wet space. Wipe it with a dry towel. Problem Fridge-Freezer does not operate Fridge or Freezer Compartment Temperature too warm Vibration or Rattling or Abnormal Noise Frost or Ice Crystals on frozen Food Moisture forms on Cabinet Surface 24Trouble Shooting Problem Moisture collects inside Fridge has odor Door not closing properly Interior light does not work Possible Causes • Too frequent or too long door openings. •In humid weather, air carries moisture into fridge whendoors are opened. •Foods with strong odors should be tightly covered orwrapped. •Check for spoiled food. •Interior needs cleaning. Refer to CLEANING section• Food package is keeping door open. Move packages that keep door from closing. • Fridge-freezer is not level. Adjust the leveling screws. • The floor on which the fridge-freezer is installedmay be uneven or the fridge-freezer may beunstable. Slightly raise the front side with the leveling screw. • No power at outlet. • Light lamp needs replacing. Refer to the Lamp Replacement sectionTrouble Shooting 251.Whenthiscrossed-outwheeledbinsymbol isattachedto aproduct itmeanstheproductiscovered bytheEuropeanDirective2002/96/EC. 2. Allelectricalandelectronicproductsshouldbedisposedofseparatelyfromthemunicipalwastestreamviadesignatedcollectionfacilitiesappointedbythegovernmentorthelocalauthorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. Disposal of your old appliance To Reverse the Doors Precaution 1. 2. 3. 4. How to Reverse the Door 1.To separate the door handle of the left side, separate the door cap and unscrew the screw in counterclockwise direction.Separate the door handle of the freezer in the same order. (You do not need to follow the above procedure for the hidden handle.) 2 1 3 4 2.After unscrewing the screw of the right hinge cover on the top, separate the right hinge cover to separate the connecting cable .Separate the bolt fixating the upper right hinge ,and carefully separate the refrigerator door . 3.After separating the upper left cap of the separated refrigerator door , carefully take off the top cap and pull the cable to connect to the hole on the left side.Set the separated top cap at the regular position and set the cap on the cable hole on the right side.Loosen the screw under the cold room door , move it to the left of the stopper , and then connect it. 4.Press and separate the cap connected to the cover front using the (+) driver, and unscrew the screws to move the cable to the left to set it. After setting the separated cover front on the regular position, screw the screws and cover them with the cap included with the owner’s manual. 5 5 6 8 11 13 7 10 10 9 12 15 14 18 14 15 11 12 32 31 10 16 17 16 17 2 1 4 3 2 3 2 26 Your fridge-freezer is designed with reversible doors,so that they may open from either the left or right hand side to suit your kitchen design. Before reversing the door, first of all,you should take out food and accessories like shelves or trays which are not fixed in the fridge-freezer. Use Torque Wrench or Spanner to fix or remove the bolt. Do not lay the fridge-freezer down.This will cause problems. Be careful not to drop the doors in disassembling or assenbling. 16 15 17 19 14 18 10 11 12 13 31 32 5 6 7 9 8 10 Note Reversing the doors is not covered by the warranty. 1 3 2 38 2 1 38 38 3 2 3 2 30 21 25 26 21 20 29 27 32 31 31 33 30 28 21 24 5. Loosen the bolt of the Hinge Middle , remove the Hinge Middle , and lift up the freezer door to separate it. (When separating the refrigerator door, separate the bush 3 5 together.)Separate the hinge cover and set it on the separated part of middle hinge . After unscrewing the screw connected to the bottom cover connect the cover cap on the right side. Loosen the pin in counterclockwise direction and move to the hole on the left side to tighten in clockwise direction. Loosen the bolt connected to the lower hinge . Unscrew the screw fixating the door stopper at the bottom of the freezer door , and fixate it on the hole on the left side with the door stopper .And then, move the upper cap to the right and cover it. 27 35 23 28 29 21 22 20 25 6. Set the separate lower hinge on the bottom hole of the left side of the freezer, and tighten the bolt . After fixating the bottom cover at the regular position, align the freezer door 3 0 on the pin of lower hinge to attach it properly. Turn over the separated middle hinge and sheet hinge to assemble them. And set the bush and washer together to tighten the bolt . (When tightening the bolt, be careful not to cause an scratch on the cap decor...

Herunterladen

Geben Sie zwei Ziffern: