Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
It is best to reposition the door hinge as necessary at the outset since it is inconvenient to do so later. To change the door hinge please refer to the diagram below and proceed as follows. 1. First unplug the appliance. 2. Remove foods and accessories like shelves or trays which are not fixed in the refrigerator. 3. Carefully lay the appliance on a cushion like packing material to avoid the damage of refrigeration circuit. 4. Use ‘+’ driver or spanner to fix or remove the bolts. 1. Unscrew the 2xBOLTS , then remove the hinge (L) . 2. Remove the LEG . 3. Gently pull the door downwards to remove it. 4. Before refitting the door, swap the Hinge Cap by pulling it out from its current location and repositioning it on the other side of the door. Care should be taken not to damage the adjacent surfaces when removing the Hinge Cap. 5. Unscrew the Upper Hinge pin (U) and screw it into the opposite side hole. 44 To Reverse the Doors How to Reverse the Door 6. After refitting the door, fix the Lower Hinge(L) in the opposite side by using 2xBOLTS. 7. Fix the Leg. 8. Carefully place the appliance in an upright position. Adjust the Leveling screw to make sure the appliance is steady and check that the door opens and closes properly. NOTE In case of applying Reversible door, when you close the door with excessive force, there could be the case that the door doesn’t close because of Reaction force. Please ascertain if the door closes properly. NOTE Reversing the doors is not covered by the warranty. Door handle(Option) 18 ...
Dieses Handbuch ist für folgende Modelle:Kühlen - GC-154S (3.47 mb)
Kühlen - GC-154SQW.CSWQCIS (3.47 mb)