Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
- The temperature display will blink when freezer temperature increases due to frequent door opening, keeping warm food, etc. (Blinking will stop when the refrigerator reaches normal temperature. If for some reason it does not stop after a long period of time, contact a Samsung service center.) Fridge If you want to control the fridge temperature, follow as below. Press the Fridge Button (Refer the picture) - The temperature can be set in 1.C interval between 1.C and 7.C. When selecting the fridge temperature, the set temperature is displayed initially for 5 seconds, then the actual temperature is displayed. (There may be slight difference between the set temperature and displayed actual temperature, but it will be corrected to the set temperature automatically.) - The Fridge temperature will change depending on the number of door openings, quantity of food, ambient temperature, etc. - Temperature of each shelve or container in the fridge may be different. - The temperature display will blink when fridge temperature is increases due to frequent door opening, keeping warm food, etc. (Blinking will stop when the refrigerator reaches normal temperature. If for some reason it does not stop after a long period of time, contact a Samsung service center.) Power Cool Press the Power Cool Button. (Refer to the picture.) - The Power cool light on the display goes on (see the arrow mark) and this function begins to operate regardless of the set fridge temperature. Press the Power Cool Button again to cancel this function. - The light goes off and it operates at the set fridge temperature again. The Power Cool function operates for 2 and a half hours regardless of the set temperature. 6 E.Saver button Press the Energy Saver button for better energy efficiency. If water drops appear on the doors, turn the Energy Saver function off. MAkING ICE Auto Ice Maker Model The ice maker will produce 8 cubes per cycle - approximately 100~130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions. Throw away the first few batches of ice to allow the water line to clear. Be sure nothing interferes with the sweep of the feeler arm. When the bin fills to the level of the feeler arm, the icemaker will stop producing ice. After the icemaker has been turned on again, there will be a time delay before the icemaker resumes operation. It is normal for several cubes to be joined together. If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink. So if you don’t want to make ice, press the Ice Off button. 16_ 16_16_operating operatingoperating operating _17 02 operating 3. Vegetable & Fruit Drawers To remove - Pull the drawer out to full extension. Tilt up the front of the drawer and pull straight out. To replace - Insert the drawer into the frame rails and push back into place. The drawers need to be removed before the glass shelf above them can be lifted out. To get the best energy efficiency of this product, please leave all selves, drawers and baskets on their original position like as illustration in page 15 Removing the freezer accessories 1. Pull Out Drawer To remove - Pull the drawer out to full extension. Tilt up rear of drawer and lift straight out. (Refer to picture 1 & 2) Open the freezer door fully and remove the drawer. To replace - Place the drawer onto the rails by tilting it up. Lower the drawer into place until it is horizontal and slide the drawer in. (Refer to picture 3) 2. Freezer Drawer Bin Swing-Type To remove - Pull the drawer out fully. Tilt up the rear of the bin and lift it out to remove. To replace - Place the bin into the rail assembly. When replacing, place the drawer bin holder into the hole of the rail Twist Ice Maker Model 1. Pull out the Ice-cube trays. 2. Fill trays up to the water level mark(arrow). 3. Put the Ice-cube trays back in position. And close the freezer door. 4. Once the water has become frozen, turn the dials on the Ice cube trays to empty Ice cubes into the storage bin. Removing and relocating the fridge accessories 1. Door Bins To remove - Simply lift the bin up and pull straight out. To replace - Slide it in above the desired location and push down until it stops. Injury may occur if the door bins are not firmly inserted. Do not allow children to play with bins. Sharp corners of the bins may cause injury. Empty the bin before adjusting it. Dust removal method -Remove the guard and wash in water. 2. Fridge shelves To remove - When pulling out the shelf, if it does not slide out easily, lift it up slightly and pull out again. To replace - When pushing in the shelf, if it does not slide in easily, lift it up slightly and push in again. The Glass shelves are heavy. Use special care when removing them. 1 2 3 4 CAUTION CAUTION 1 2 3 1 2 3 1 2 2 1 18_ operating Do not put anything other than water in the water tank. • Do not put anything other than water in the water tank. • Fill with ...
Dieses Handbuch ist für folgende Modelle:Kühlen - RF62HERS (5.27 mb)
Kühlen - RF62QERS (5.27 mb)