Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
• Do not touch hot surfaces. Use handle or knobs. • To protect against electric shock do not immerse cord, plugs, or other electric parts in water or other liquids. • Close supervision is necessary when this appliance is used by or near children. • Unplug the appliance from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts. • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or if the appliance is dropped or damaged in any manner. If you experience any problems with your appliance, unplug it immediately from the electrical outlet. For service information see warranty page. • The use of accessory attachments not recommended by Focus Electrics may cause fire, electric shock, or injury to persons. • Do not use this appliance outdoors. • Do not let cord hang over the edge of a table or counter, or touch hot surfaces. • Do not place on or near a hot gas or electric burner, or in a heated oven. • Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. • To disconnect, turn any control to “OFF,” then remove plug from wall outlet. • Do not use appliance for other than intended use. • Avoid contacting moving parts. • Do not let cord contact hot surface, including the stove. • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. • For household use only. To prevent personal injury or property damage, read and follow all instructions and warnings. OPERATING PRECAUTIONS • Set breadpan on hot pad, trivet or other heat protective surface. Do not set hot breadpan directly on the counter, table or other surface. • Do not put hand inside oven chamber after bread pan is removed. Heating unit will still be hot. • Do not use your breadmaker with a converter or transformer. This will destroy the electronic controls. • Do not attempt to repair this appliance yourself. • A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. • Longer, detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. While use of an extension cord is not recommended, if you must use one, the marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance. If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord. The cord should be arranged so that it will not hang over the counter top or tabletop where it can be pulled by children or tripped over. SAVE THESE INSTRUCTIONS GETTING TO KNOW YOUR BREADMAKER The control panel on your bread maker was designed to be very easy to use. Please review the following features to better understand the control panel. CONTROL PANEL and FUNCTIONS LCD DISPLAY: The display indicates when the appliance is ready for use. When the unit is first plugged in the default program is displayed. “1 3:25” appears on the display. The “1”specifies which program is selected (1-12 programs) and the “3:25” is the length of the program in hour:minutes. The position of the marking at the top of the display indicates the weight of the loaf selected (1, 1-1/2 or 2lb) with 2lb as the default. The position of the marking at the bottom of the display indicates the degree of browning that is selected (light, medium, dark or rapid) with medium as the default. As the program proceeds the digits of the time displayed will decrease progressively indicating remaining time. During operation the status of the program is indicated in the display with a mark at the active program mode; “Timer,” “Preheating,” “Kneading,” “Pause,” “Rising,” “Baking,” “Keep Warm,” and program “End.” “START/STOP” Button: The “START/STOP” button is used to start, stop, pause or cancel a program. Pressing the button when the bread maker is idle will start the program. Pressing the button when the bread maker is active will pause the program. Pressing the button while the program is paused will resume the program. When the bread maker is active or paused, pressing and holding the button until a short alert is heard will cancel the program. A short alert is heard with each press of the “START/STOP” button. You must set all your desired program settings before starting the program. The program cannot be changed while the bread maker is active. UP and DOWN “TIMER” Buttons: The “TIMER” buttons are used to set a delayed program end time. Only the following programs can be used with the delay timer: (1) “BASIC,” (2) “FRENH,” (3) “WHOLEWHEAT,” (4) “SWEET,” (8) “DARK,” (9) “DOUGH” and (10) “BAGEL DOUGH.” The (5) “SUPER RAPID ...
Dieses Handbuch ist für folgende Modelle:Brotbackautomat - Chris Freytag 41200CF (563.44 kb)