Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The blower is equipped with a metal, washable filter which protects equipment in manufacturing plants, dance clubs, warehouses, distribution centers, and areas with high traffic volume. GENERAL DESCRIPTION The Atlas Sound BP195-320 Blower provides exceptional cooling performance for 19" racks and enclosures requiring ventilation for heat-generating equipment. The unit contains dual inlet, twin fans for quiet and efficient air handling. Fans operate at only 62 watts, 50/60Hz; .52 Line Amps @ 3350 RPM, to circulate air at 320 CFM (151 L/Sec). The 7" tubeaxial fans are of a precision ball bearing design and are pancake mounted to provide smooth, trouble-free performance. The blower enclosure is 17 inches wide mounted to a 19-inch wide polished chrome face plate grille equipped with knurled captive fasteners for easy filter cleaning. The permanent all-aluminum filter is corrugated mesh in a one-piece frame which slides into an aluminum channel. The enclosure case design features a 15” top to rear slope from the center of the cabinet for uniform air circulation throughout the enclosure, has notched flanges on EIA Standard spacing. Grille area is open for maximum air flow. The case is finished in textured black baked epoxy and includes fan guards. The cord is a three wire, internally grounded 44 inch with molded plug, and is secured to the case with a strain relief bushing. For replacement/spare filters order P/N: FLT195-320. MODEL RU PANEL SPACE PANEL STYLE FAN QTY CFM TOTAL SPL dBA @ 3' VOLTS AC HZ WATTS LINE AMPS BP195-320 3 5]/!" (133mm) Flush (38" Thick) 2 320 59.5 115 60 62 .52 FLT195-320 Replacement / Spare Filter Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 © 2001 Atlas Sound LP Printed in U.S.A. 000501 SL10-1520 TEN ARCHITECT AND ENGINEER SPECIFICATIONS Blower shall be Atlas Sound model BP195-320 or approved equal to deliver 320 CFM@ 0-INCHES. Unit shall have two 7" dia. fans, with stainless steel precision ball bearings. Enclosure shall be 17" wide with a 19" wide grille. Grille shall provide maximum air flow, and have knurled captive fasteners. Enclosure to have notched flanges on EIA spacings. Filter shall be washable, permanent type, constructed of corrugated aluminum mesh mounted in an aluminum channel. Cord shall be 44 inches long three wire with molded plug and shall be internally grounded to unit housing. Enclosure shall be finished in textured black epoxy with chrome grille. POWER CABLE WITH 3-PRONG PLUG 44.0" LONG (MIN.) STUD - ENGAGES WITH CAPTIVE THUMBNUT TO HOLD GRILLE ON. ONE AS SHOWN PLUS ONE ON OPPOSITE SIDE MOUNTING FLANGE SLOT ■ FOR MOUNTING BLOWER TO CUSTOMER PANEL TWO AS SHOWN PLUS TWO ON OPPOSITE SIDE INSIDE EDGE BLOWER MTG FLANGE OUTSIDE EDGE CUSTOMER PANEL MOUNTING ANGLES. .50 12.7 FILTER - CLEANABLE ALUMINUM MESH REPLACEMENT FILTER P/N IS FLT195-320 CAPTIVE THUMB NUT FOR MOUNTING GRILLE TO STUD. ONE AS SHOWN PLUS ONE ON OPPOSITE SIDE Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 Printed in U.S.A. 000501 SL10-1520...