Stimmen - 5, Durchschnittliche Bewertung: 3.6 ( )

Hersteller: Lifebreath Dateigröße: 2.05 mb Dateiname: 79286f1d-786b-5384-21ab-0b3110bb268c.pdf Unterrichtssprache:

a forced air furnace or air handler, operating at a higher static. After installation, the compatibility of the two pieces of equipment must be confirmed by measuring the airflow’s of the Heat Recovery Ventilator (HRV) Energy Recovery Ventilator (ERV) by using the balancing procedure found in this manual. It is always important to assess how the operation of any HRV/ERV may interact with vented combustion equipment (ie. Gas Furnaces, Oil Furnaces, Wood Stoves, etc.). NEVER install a ventilator in a situation where its normal operation, lack of operation or partial failure may result in the backdrafting or improper functioning of vented combustion equipment!!! TO BE COMPLETED BY CONTRACTOR AFTER INSTALLATION Installing Contractor Telephone / Contact Serial Number Installation Date Model * LEAVE FOR HOMEOWNER NOTE: Due to ongoing research and product development, specifications, ratings and dimensions are subject to change without notice. TI-84R-NE Table of Contents Introduction ................................................................2 Warranty ....................................................................2 ERV Questions & Answers ........................................3 Climate Map...............................................................4 Technical Data -Model 95MAX ................................5 Technical Data -Model 155MAX ..............................6 Technical Data -Model 155ECM ..............................7 Technical Data -Model 155MAX RX ........................8 Technical Data -Model 200MAX ..............................9 Technical Data -Model 200MAX RX .....................10 Technical Data -Model MAXTOP...........................11 Technical Data -Model 195DCS.............................12 Technical Data -Model 300DCS.............................13 Technical Data -Model 200ERV.............................14 Technical Data -Model 200ERVD ..........................15 Function and Control Operation of the ControlAir 15 .................................16 Glossary of Terms ...................................................16 Selecting Speeds and Modes of Operation .............17 The Control Pad Mounted in the Control Module ....18 Optional Remote Controls .......................................19 Using the Dehumidistat............................................20 Schematic Diagram -Model 95MAX.......................21 Installation Installation..............................................................22 • Location • Mounting the HRV/ERV • Electrical • Installing the Drain Line and "P" Trap Installing Air Ducts ...............................................23 • Outside Weatherhoods • Locating the Weatherhoods • Installing Ducting from Weatherhoods to the HRV/ERV • Warmside Ducting Supply Air Ducting ...................................................24 Stale Air Exhaust System ........................................24 Dampers and Grilles ................................................24 Installation Diagrams .........................................25-28 Air Flow Balancing ..................................................29 Maintenance Maintenance Routine For HRV................................31 Maintenance Routine For ERV ................................32 Troubleshooting .......................................................33 Interlocking HRV Operation to an Airhandler/ Furnace Blower........................................................34 Wiring Diagrams .................................................35-36 Introduction HRV -Aluminum Core A Heat Recovery Ventilator (HRV) is designed to provide fresh air into a building while exhausting an equal amount of stale air. During the winter months, the incoming cold fresh air is warmed by utilizing the heat recovered from the stale air before it is exhausted to the outdoors. During summer months when the indoor space is air conditioned, the Heat Recovery Ventilator will help in cooling the incoming fresh air with the stale air that is being exhausted. ERV -Enthalpic Paper Core An Energy Recovery Ventilator (ERV) is designed to provide fresh air into a building while exhausting an equal amount of stale air. An ERV is designed for use in warm humid areas with heavy air conditioning use. The ERV will transfer both sensible and latent heat from the incoming fresh air to the outgoing stale air thereby reducing the load (due to ventilation) on the air conditioning system. ERVs are not suitable for climates where the temperature drops below -4°C (25°F). Warranty All Heat Recovery Ventilators carry a Lifetime Warranty on the heat recovery core and a 5 (five) year replacement parts warranty. All Energy Recovery Ventilators carry a 5 (five) year warranty on the energy recovery core and a 5 (five) year replacement parts warranty. During the warranty period, if any core experiences a failure or perforation caused by normal use while owned by the original purchaser, a replacement core (FOB our plant) will be supplied at no expe...

Herunterladen

Geben Sie zwei Ziffern: