Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Honeywell Dateigröße: 489.69 kb Dateiname: 13520.pdf Unterrichtssprache:

If there are heavy concentrations of odors, smoke, or large particles in the home, you may need to change the activated carbon pre-filter more often. We DO NOT recommend operating the air cleaner without the activated carbon pre-filter. The HEPA filter may become contaminated and begin to emit any odors captured. CAUTION: Do not attempt to wash either the activated carbon pre-filter or the HEPA filter. They are not washable and washing will damage the filters. How to Change the Filters... CAUTION: DISCONNECT FROM POWER SUPPLY BEFORE SERVICING The only two parts requiring any service are the activated carbon pre-filter and the HEPA filter. No tools are needed. To change either filter, disassemble the unit as shown. 1. Loosen the carrying handle by turning it counterclockwise and lift filter cage cover from unit. For Model Series 10500: With the unit on a carpeted floor, twist the air cleaner filter cage cover counterclockwise until it stops (about 90°), and lift the cover from the base. 2. Lift HEPA filter and activated carbon pre-filter from the base. 3. Remove the fasteners from the activated carbon pre-filter and remove it from the HEPA filter cartridge. 4. Replace filter(s) as needed, and discard used filters. 5. Wrap the activated carbon pre-filter around the HEPA filter cartridge and secure it with the fasteners provided. Reassemble your Honeywell air cleaner as described below: 1. Place the assembled HEPA filter and the activated carbon pre-filter on the base. 2. Replace the filter cage cover. 3. Reattach the carrying handle and turn it clockwise until securely tightened. For Model Series 10500: Position the filter cage cover on the unit. Press down on filter cage cover and rotate clockwise until it snaps securely into place. Place the power control switch in the OFF position. • Check to make sure that the power cord is correctly connected to the outlet. • Test that the outlet is functioning properly using another appliance or lamp. • Check the fuse or circuit breaker. The outlet may be overloaded if other appliances are also in use. Determine and correct the cause of the overload. • The thermal overload protection device on the air cleaner's motor may have engaged. • If none of the above procedures restore operation, return your unit to the store or if the store's return policy does not allow, return the complete unit per the instructions in the warranty section of this owner's guide. Do not attempt to repair the unit yourself. If the Air Cleaner Does Not Operate... Model Series 10500 ............................; ..............; ....; ....; ....; ....; ; ....; ....; ............; ............; ............; ............; ............; ............; ............; ............; ............; ............; ................................; ................; ................; ................; ................; ................; ................ ; ; ..........; ; ; .. Storage... If you store your Honeywell HEPA air cleaner for more than 30 da...

Herunterladen

Geben Sie zwei Ziffern: