Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
2. Place air purifier where it is not easily knocked over by persons in the household. 3. Always turn the air purifier to the OFF position and unplug from the wall outlet when not in use. 4. To disconnect the air purifier, first press the Power ( ) button to turn the air purifier off, grip the plug and pull it from the wall outlet. Never pull by the cord. 5. Do not use any product with a damaged cord or plug or if product malfunctions, is dropped or damaged in any manner. Keep the cord away from heated surfaces. 6. Do not use air purifier outdoors. 7. Never use air purifier unless it is fully assembled. 8. Do not run power cord under carpets, and do not cover with throw rugs. Arrange cord such that it will not be tripped over. IFD™ HIGH PERFORMANCE AIR PURIFIER Model HFD-135 9. Do not use air purifier where combustible gases, vapors or an oxygen rich environment are present. 10. Do not expose the air purifier to rain, or use near water, in a bathroom, laundry area or other damp location. 11. The air purifier must be used in its upright position. 12. Do not allow foreign objects to enter ventilation or exhaust opening as this may cause electric shock or damage to the air purifier. Do not block air outlets or intakes. 13. Locate air purifier near the outlet and avoid using an extension cord. 14. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature. 15. A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet. 16. Do not sit, stand or place heavy objects on the air purifier. 17. Disconnect power supply before servicing. WARNING: To Reduce the risk of fire or electric shock, do not use this air purifier with any solid-state speed control device. The sealed UV bulbs contain a small amount of mercury. Dispose of these items at household hazardous waste collection sites only. If the UV bulb breaks, do not vacuum or handle with your bare hands. HFD-135 OM English.qxd 10/14/05 5:35 PM Page 2 INTRODUCTION Thank you for purchasing the Honeywell IFD™ High Performance Air Purifier with a breakthrough technology in air purification. Please read below on how to operate and care for your new air purifier. YOUR IFD™ AIR PURIFIER SET-UP Control Panel Rear Door IFD™ Filter Filter Basket Pre-Filter UV Bulbs UV Cover • Select a firm, level and flat location. For proper air flow, locate the unit at least 3 feet (1 M) from any wall or furniture. • Ensure the exit grill faces away from the closest wall or furniture. • Ensure no grilles are blocked. • Plug into a grounded 120V outlet. See IMPORTANT SAFETY INSTRUCTIONS. 2 HFD-135 OM English.qxd 10/14/05 5:35 PM Page 3 OPERATION • Ensure the air purifier is plugged into a working outlet. • Touch the Power ( ) button to turn the air purifier On. The LCD screen will display the current setting. (Fig. 2). • When first starting the unit, you can hear a change in speed and this is normal. • To change speeds, press the up ( ) or down ( ) buttons. The display will indicate the current setting: Low ( ), Medium ( ), High ( ). • For best results, set the unit to operate at High ( ) speed. For quieter settings, or during sleep, set the unit to Medium Timer Button UV Button Filter Reset Button Power Button UV Reset Button Speed +/– Buttons Timer +/– Buttons Fig. 1 Fig. 2 Indicates continuous operation Fig. 3 ( ) or Low ( ). • Note that during normal operation, the rotating continuous operation symbol ( ) will appear in place of timer hours. • To turn the unit off, touch the Power ( ) button. Timer Operation Once the air purifier is turned on, you can program this unit to turn off automatically after a set amount of time. • Press the Timer button – the LCD screen flashes the number 18 (Fig. 3). • Press the timer plus ( ) or timer minus ( ) buttons to increase or decrease the desired number of hours (1 to 18). The selected number will flash for a few seconds – once it stops flashing, the air purifier is in Timer mode. (Example: If you want the unit to turn off in 6 hours, touch the Timer button, then press the timer minus ( ) button until the number "6" is displayed.) • The Timer button will be illuminated in Timer mode and the number of hours remaining will be displayed. • To turn the Timer mode off, press the Timer button. The continuous operation icon ( ) will appear. DUAL UV LAMP OPERATION • Press the UV button to turn the Lamps on or off (Fig. 4). • The Lamps will light and you will see a faint blue glow along the top grille of the unit. This is a visual effect. The UV bulbs are located in the lower portion of the unit. • The UV button will be illuminated on the control panel. NOTE: Removing the IFD™ fi...