Anleitung Bionaire, modell BAP9700
Hersteller: Bionaire Dateigröße: 785.08 kb Dateiname: 297ed069-0b94-4ca7-90fe-e9040d081982.pdf
Unterrichtssprache:
|
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Anleitung Zusammenfassung
5. If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wipe it down. DO NOT WASH FILTERS. WARNING: Do not allow moisture to come in contact with the main housing of the air purifier. Cleaning The PERMAtech® Filter The PERMAtech® filter is designed to never need replacement. However, we recommend regular cleaning for optimal performance. • Every few weeks, check the condition of the filter. • After approximately 4 months of operation, a Filter Service Indicator ( ) will appear on the LCD Display to alert you to clean the filter before further use. To clean the filter: 1. Turn off and unplug the air cleaner. 2. Remove the air inlet grill. 3. Remove and examine the foam pre-filter. If it has collected dust or lint, remove and wash it in warm soapy water. Rinse and drip dry thoroughly before placing it back into the grill inlet. 4. Check the condition of the PERMAtech® filters and remove if dirty. 5. Clean the PERMAtech® filter. • Using your vacuum cleaner, run the brush attachment along both sides of the filter and clean between the pleated layers (Figure 3). IMPORTANT: Do not use water, household cleaners or detergents to clean the PERMAtech® filter. Reinstalling The PERMAtech® Filter After Cleaning NOTE: A hang tab and filter clips ensure the filter attaches properly. 1. Make sure the hang tab is securely in place. Align the clip on the top of the PERMAtech® filter with the rails on the inside of the unit. Gently slide the filter onto the rail (see Figures 4 and 5). 2. Place air inlet grill back onto unit securely. 3. Reset the Filter Service Indicator by pressing the Power button ( ) for 3 seconds. NOTE: Every time you power on the air cleaner, the Filter Service Indicator icon ( ) will blink 3 times on the LCD display. This routine test checks the current condition of the filters. If filters are in good condition, the icon will disappear. If not, the icon will remain lit until filters have been cleaned and Filter Service Indicator ( ) has been reset (see instructions above). Should the filter become damaged during cleaning, replacements are available by calling 1-800-253-2764. C L E A N I N G / MA I N T E N A N C E T R O U B L E S H O O T I N G 3 YEAR LIMITED WARRANTY Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of three years from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes. What are the limits on JCS’s Liability? JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other right...