Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Gently return the unit into upright position. Step 8 Place lid back to its proper position by aligning the arrow with the rear seam. AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: 1-877-688-3939 INSTALLING FILTER ASSEMBLY- 600 D, DX The AllerAir 600 models ship with their large carbon filters in a separate box. This is done to safeguard your unit during shipping.To insert the filter, refer to the diagram below. Step 1 Turn Power Off and unplug receptacle. Lay unit upside down. Step 2 With a #2 Philips screw driver, remove the four screws from the bottom of the unit. Step 3 Gently grasp wheels. Remove base by gently pulling on the wheels. Step 4 Remove only one of the white,felt, donut-shaped gaskets from the inside of the purifier body. Step 5 Insert the carbon filter (either a Model 600 D Carbon or a Model 600 DX Carbon) into the unit. Step 6 Replace the gasket that had been removed in STEP 4. AllerAir Industries Inc. Toll free: 1-888-852-8247 /Fax: 1-877-688-3939 ¿¡iiet&gir AltoMr Indumtrim^^ INSTALLING FILTER ASSEMBLY- 600 Models (except D and DX) The AllerAir 600 models ship with their large carbon filters in a separate box. This is done to safeguard your unit during shipping.To insert the filter, refer to the diagram below. Step 1 Turn Power Off and unplug receptacle. Lay unit upside down. Step 3 Gently grasp wheels. Step 2 With a #2 Philips screwdriver, remove the four screws from the bottom of the unit. Step 4 Remove base by gently pulling on the wheels. Step 5 First remove the HE PA filter by placing thumbs on the inner side of the filter. Then pull up gently until totally out. Step 6 Than remove the Carbon filter by placing thumbs on the inner side of the filter. Then pull up gently until totally out. Step 7 Replace filters with new ones then reassemble by inserting the Carbon filter first then the HEPA filter. Step 9 With a screw driver, place 4 screws back into their positions. Gently return the unit into upright position. Step 8 Place lid back to its proper position by aligning the arrow with the rear seam. AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: 1-877-688-3939 www.allerair.com...
Dieses Handbuch ist für folgende Modelle:Luftreiniger - 600 DX (310.71 kb)