Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Bionaire Dateigröße: 1.14 mb Dateiname: Unterrichtssprache:

The length of the cord used on this product was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the air cleaner. Care must be taken to arrange the extension cord where it cannot be pulled on by children or accidentally tripped over. IONIZER Your Air Cleaner has an independently controlled ionizer, which, when turned on, releases negative ions into outgoing filtered air. Ions are tiny particles that carry a positive or negative charge. These ions exist naturally around us, in the air, water and ground. Both positive and negative ions are colorless, odorless and completely harmless. Negative ions help the air purification process by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke and pet dander to form larger particles that are then more readily captured by the filter system, or they may be attracted to positively charged surfaces like walls or floors. You may also note after extended use, that dust may have collected around the grills or front panel. This is from the ionization affect caused by the negative ions exiting from the air outlet. This is additional evidence of the air cleaning effectiveness of negative ions. The dust can be easily removed with a clean, damp cloth or soft brush. NOTE: It is important to clean the filter at the recommended intervals. Using the ionizer in conjunction with dirty filters may result in dirty particles exiting the air cleaner and being attracted to walls, carpets, furniture or other household objects. These dirty particles may prove very difficult to remove. REINSTALLING THE PERMAtechTM FILTER AFTER CLEANING NOTE: Use hang tab and filter clips to ensure the filter attaches properly. 1. Make sure the hang tab is securely in place. Align the clip on the top of the PERMAtechTM filter with the rails on the inside of the unit. Gently Figure 3 slide the filter onto the rail (see Figures 3 and 4). 2. Place air inlet grill back onto unit securely. Figure 4 3. Reset the Filter Indicator Light by inserting a small object (such as a pin or paperclip) into the hole marked . TIPS AND TROUBLESHOOTING ISSUE SOLUTION UNIT WILL NOT OPERATE • Make sure unit is properly plugged in and outlet is energized. • Make sure unit turned ON. DECREASED AIR FLOW • Make sure nothing is blocking air inlet and filtered air outlets. • Remove all plastic bags from filters. • Check condition of filters and clean if necessary. • Make sure that the air intake grill is at least 1 to 3 feet from away the wall. PERMAtechTM FILTER APPEARS DIRTY, EVEN AFTER VACUUMING CLEAN • This is normal and does not affect performance in any way. A new filter is not necessary. EXCESSIVE NOISE • Remove plastic bag(s) from filter(s). • Ma...

Herunterladen

Geben Sie zwei Ziffern: