Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Pinnacle Products International Dateigröße: 328.36 kb Dateiname: Unterrichtssprache:

Model #s: BCB-36-BDF, PT-36-BDF, BCB-42-BDF, PT-42-BDF BCB-48-BDF, PT-48-BDF CONSUMER: Retain this manual for future reference. Please note the serial number of your fan, and write it on the back of this User’s Manual for future reference. Your serial number is located inside the rear guard. This product protected under U.S. Patent # 7,413,199 Model HP RPM CFM HIGH LOW HIGH LOW 36” 1/3 HP 530 445 10,200 7,300 42” 1/2 HP 460 385 13,300 9,500 48” 1 HP 430 350 17,200 10,600 Table of Contents Safety Information............................................2 Installation.........................................3 Wiring Diagram.................................................3 Maintenance and Storage...............................3 Belt Maintenance..............................................3 Exploded View..................................................4 Replacement Parts List....................................4 Troubleshooting................................................5 Warranty ..........................................................6 Pinnacle Products International, Inc. 668 Stony Hill Road #302 Yardley, PA 19067 USA Phone: 215-891-8460 Fax: 215-891-8461 Web: Email: info@pinnacleint.com 90-045-0065 NEVER LEAVE A FAN OPERATING UNATTENDED Portable Air Circulator IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY, SERVICE OR USE OF THIS FAN. FAILURE TO COMPLY WITH THESE INSTRUCTIONS COULD RESULT IN SERIOUS PERSONAL INJURY AND / OR PROPERTY DAMAGE. Safety Information WARNING 1. This unit is designed for indoor use only. Do not expose to elements or allow to become wet. 2. To guard against electric shock while operating, do not allow fan to come in contact with other grounded objects such as pipes, radiators, etc. 3. To reduce the risk of electrical shock, do not use with any solid state speed control device. 4. Do not use to exhaust hazardous chemicals or use near any flammable liquids or gases as sparks from motor may ignite fumes. 5. Turn off, unplug unit, and wait for fan to stop before moving, storing, and / or changing operating locations. 6. Operate only on 115 volt 60 Hz (cycle) current with a minimum of a 15 amp circuit. 7. Before operating always check fan for loose or damaged parts. Inspect power cord for any damage. Never use fan if any parts are damaged or missing. Never use fan without safety guards attached. 8. When used with an extension cord, use only cord of proper size (Amp rating), UL listed, and with receptacle to accept three prong grounded plug furnished on the fan’s power cord. Always keep power cord and extension cords away from heat, oil, and sharp edges. Inspect cords periodically and replace if damaged. 9. Disconnect fan from power source when not in use, before servicing and when cleaning or repairing. 10. Repair of this appliance should be done by a qualified electrician. 11. In case of power failure, turn fan off at switch to prevent unexpected restarting and component damage. 12. Keep ...

Herunterladen

Geben Sie zwei Ziffern: