Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Anleitung Zusammenfassung
Use the UP/DOWN keys to adjust the minute. Tapping the key will change the minute by increments of one and holding the key will change the minute rapidly. 4. Press the DAY/TIME key to accept the minute setting and go to the day of the week. Use the UP/DOWN keys to set the current day. 5. Press the DAY/TIME key a final time to accept the day setting and return to Normal mode. Fig. 7 Fig. 8 Fig. 9 Fig. 10 DAY TIME DAY TIME DAY TIME DAY TIME 41674-01_REV 3-11-05.pmd 7 3/11/05, 5:01 PM Operation Remote Operation For your convenience, a remote control is provided with this air purifier. The remote may be used to turn the air purifier on or off and adjust the fan speed. Operating the Air Purifier with the remote: 1. Install two AAA batteries (UM-4 or IEC R03 or equivalent). Refer to the graphics in the battery compartment for proper orientation of the batteries. 2. To use the remote, point it at the air purifier, then press and release the appropriate key. The key functions are as follows: 0 - OFF, 1 - LOW, 2 - MEDIUM, and 3 - HIGH. When using the remote, the air purifier remains in the mode that it is currently set for. When the keypad is locked, the remote may still be used to adjust the speed or turn off the air purifier. If the remote is not working properly, first be sure that the remote is facing the air purifier when pressing the key. If it still does not work, check the batteries. 41674-01 8 41674-01_REV 3-11-05.pmd 8 3/11/05, 5:01 PM 9 41674-01 Operation Display Modes Your air purifier has 3 display modes – Clock Display, Pre-Filter Display, and Filter Display. When the unit is running, the display also provides additional information about the settings of the air purifier. The features for each mode and how to change modes is described below. Clock Display: The default mode of the unit is the Clock Display. In this mode, the day indicator, time, and AM/PM indicator will be lit. If military time has been chosen (See Setting Day and Time, pg. 13), the AM/PM indicator will not be visible. Pre-Filter Display: This display shows the number of hours that the pre-filter has been in use. In addition to the run hours, you will see the Pre-Filter indicator. If the run hours have reached 2000 hours (approximately 3 months of use), the Pre-Filter indicator will flash to show that the pre-filter should be changed. Refer to Filter Run- Time Counters for additional information (pg. 12). Filter Display: The Filter Display mode tells you how many hours the filter has been in use. In addition to the run hours, you will see the Filter indicator. If the run-hours have reached 8000 hours (approximately 1 year of use), the Filter indicator will flash to remind you to check the filter. Refer to Filter Run-Time Counters for more details (pg. 12). Changing Display Mode: 1. To toggle from Clock Display to Pre-Filter Display to Filter Display, press the DISPLAY key. 2. The DISPLAY key is active any time that the display is visible. When the air purifier is turned on, the following features are also shown. If the unit is turned off by the On/Off key, these features are not displayed. • Speed Indicator to show blower setting (0, 1, 2, or 3). • Animated Blower Wheel will rotate when blower is on. • Control Mode is indicated by AUTO or MANUAL. • The Current Program number is visible when the unit is in Auto Mode. Fig. 11 Clock Display Fig. 12 Pre-Filter Display Fig. 13 Filter Display DISP 41674-01_REV 3-11-05.pmd 9 3/11/05, 5:01 PM 41674-01 10 Operation Manual and Auto Operating Modes Your Hunter Air Purifier has two distinct operating modes – Manual and Auto. The Manual Mode allows you to override the control programs that have been set and to hold the settings until you adjust them. In Manual Mode, the automatic programs are not active. You select whether the unit is on or off and choose the blower speed. In Auto Mode, your air purifier is capable of running 4 separate programs for the weekdays and an additional 4 programs for the weekend. You can choose to have the same programs for every day or you can have different programs for the weekdays and the weekend. The air purifier is pre-programmed for all 7 days of the week as shown below. Refer to User Programming on pg. 15 for instructions on changing the programs. When using the remote, the air purifier remains in the mode that it is currently set for. Table 1: Pre-set Programming Provided for Each Air Purifier To switch between Manual and Auto Modes: 1. To change operating modes, press the AUTO key. The current operating mode will appear on the display (either AUTO or MANUAL). 2. When changed to Auto Mode, the unit will automatically adjust its controls to the appropriate program for the day and time. When Manual Mode is active, the unit will maintain current settings until you change them. AUTO Program Setpoint Time Blower Speed 1 8:00 am 2 (Medium) 2 3:00 pm 3 (High) 3 5:00 pm 2 (Medium) 4 10:00 pm 1 (Low) Fig. 14 Auto Mode Fig. 15 Manual Mode 41674-01_REV 3-11-05.pmd 10 3/11/0...