Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Field Controls Dateigröße: 243.93 kb Dateiname: 46567000.pdf Unterrichtssprache:

*The definition of a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the precautions required, and has complied with all the requirements of the authority having jurisdiction. WARNING: Read the installation instructions carefully and completely before proceeding with the installation. GENERAL SYSTEM INFORMATION Field Controls high efficiency series of media air cleaners are designed for installation into heating, ventilation, air conditioning (HVAC) systems to reduce the amount of airborne particulate (1.0 micron and larger) including pollen, dust and dander promoting better indoor air quality. The media air cleaner should be installed in the return air system duct, such that all of the circulated air passes through the filter. For maximum filtering performance, the air circulation fan should operate continuously. Model FC - 1400 FC - 2000 Nominal Filter size 16” x 25” x 5” 20” x 25” x 5” Air flow range 600-1400 CFM 600-2000 CFM MERV rating 11 11 Filter Replacement P/N 46568500 46568600 Cabinet dimensions 16-1/4” x 24-7/8” x 7-1/8” 20-1/4” x 24-7/8” x 7-1/8” Cabinet opening dimensions 13-7/8” x 22-1/2” 17-7/8” x 22-1/2” UL filter media listing Class 2 Class 2 NOTE: FOR OPTIMUM PERFORMANCE, REPLACE THE MEDIA FILTER EVERY 6 TO 12 MONTHS. DO NOT DESTROY THESE INSTRUCTIONS MUST REMAIN WITH EQUIPMENT Items Included: 1) Cabinet 1) Media Filter 1) Installation Instruction Manual MOUNTING OPTIONS Figure 3 Figure 1 Figure 4 Figure 2 Figure 5 CAUTION: Before installing a media filter into the HVAC system, the Qualified Agency must consider the additional pressure drop being added to the HVAC system. 1. The filter must be installed on the return side of the HVAC system, between the return air duct and the intake of the system blower. NEVER install on the supply side of the HVAC system. 2. The filter access panel MUST be installed where there is at least twenty-six (26) inches in front of it. This allows clearance for the replacement of the media filter. 3. Some installations may require a duct transition. Transitions may be needed to reduce pressure drop and maintain appliance efficiency. The appliance must operate within the manufacturer’s recommended temperature and pressure drop requirements. 4. Check the flow capacity and pressure drop (Figure 6) to determine the filter is properly sized. INSTALLATION: WARNING: Always shut off the electrical power supply before working on the appliance. 1. Refer to the typical mounting positions (Figures 1 to 5) for proper placement of the filter cabinet. 2. Remove the metal filter cabinet from the carton and plastic bag. 3. Remove the access panel door and pull the media filter (in plastic bag) out of the cabinet. DO NOT install the media filter with the plastic bag around it. 4. Position cabinet so access panel is available for easy media filter replacement The access panel MUST be accessible to remove and replace the media filter. (Note: Minimum of twenty-six (26) inches for front clearance). 5. Position the filter cabinet onto return air side of the appliance (Figures 1 to 5). Duct transitions may be required to properly mount the filter cabinet. 6. When the filter cabinet is mounted directly to the appliance or existing duct, mark the inside opening of the filter cabinet and all 12 mounting screw locations. 7. Drill the marked mounting holes with a 1/8 inch diameter drill bit. Remove the marked filter opening with metal cutting shears or equivalent. 8. Attach filter cabinet to the appliance or duct work using ...

Herunterladen

Geben Sie zwei Ziffern: