Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Please read each section of this manual carefully. The specific model chosen should be appropriate for the local water conditions and the customer's needs. Check the Performance Data Sheet for the performance characteristics and the conditions of use. The Water Factory Systems undercounter RO drinking water appliances are designed to connect permanently to a home plumbing system. To ensure that the installation conforms to your state and local plumbing codes, it is recommended that the installation be performed by a qualified installation specialist for RO drinking water appliances or a licensed plumber. Failure to install the system as instructed will VOID the warranty. Caution: The RO membrane cartridge is shipped with a preservative solution inside. Make sure to flush it thoroughly as directed before the first use. TABLE OF CONTENTS I. Installation Instructions A. Determine the appliance location....................................................................................3 B. Prepare the area for installation ......................................................................................3 C. Prepare the appliance for installation..............................................................................4 D. Make the faucet mounting hole ......................................................................................4 E. Mount the faucet..............................................................................................................5 F. Install the feed water tapping valve and tubing ..............................................................6 G. Prefill and sanitize the storage tank................................................................................7 H. Install the drain connection ............................................................................................7 I. Install the purification assembly and storage tank ..........................................................8 J. Make the tubing connections ..........................................................................................8 K. Install the icemaker hookup (optional) ............................................................................8 L. Start up the appliance ....................................................................................................9 M. Flush the appliance of the preservative and check the operation ..................................9 N. Cleanup and paperwork ..................................................................................................9 O. Appendix for basement installations ..............................................................................10 P. Installation troubleshooting..............................................................................................11 II. Operation & Maintenance Instructions A. Important water quality assurance requirements ............................................................12 B. Replacing the filter cartridges..........................................................................................12 C. Replacing the RO membrane cartridge ..........................................................................13 D. Sanitizing the RO appliance............................................................................................13 E. Long term non-use ..........................................................................................................14 I. Installation Instructions A. DETERMINE THE APPLIANCE LOCATION The appliance can be located under a sink or in a basement depending on space availability and the customer's preference. If a basement installation is selected, additional tubing, hardware and fittings may be needed and a hole will have to be made from inside the cabinet, through the floor, to the basement. Never install it in an area of the home where the temperature may drop to freezing, because damage to the appliance may occur. It will be important that appropriate, protected, electrical service be available at the appliance location. If not already available, make sure to contract the necessary work prior to appliance installation. The exact placement of the various components of the appliance will vary from installation to installation. The installer, in conjunction with the customer, must decide on where to place the faucet, tank and purification assembly by balancing the homeowner's convenience with ease of installation and servicing. (See Fig. 1 & 7). A nearby electrical outlet will also be required for proper installation of this device. Considerations for an icemaker or other remote hookup should be predetermined, including routing and any additional tools, fittings, and tubing that may be required. B. PREPARE THE AREA FOR INSTALLATION Remove supplies from under the sink and stack them neatly away from the working area. Arrange a light for the work area, if necessary. If a basement installation is called for, determine where th...